Click here to view the Lab Configuration menu.

Click here to view the complete Optifacts User Documentation Index.

Click here to contact us.

Introduction

This document provides instructions for enabling the Minimum Crib Diameter custom configuration.

Procedure

From the Optifacts main menu:

Select Option 3 – Editor Utilities and press Enter.

Select Option 6 – Configuration Editor and press Enter.

Select Option 6 – Edit Custom Configuration and press Enter.

The Custom Configuration Editor displays.

• Press “Q” to Query.
• Enter any relevant data and press Escape to perform the search.

If the table does not exist:

• Press “A” to add a new record.
• Enter all the information, as shown in the example below.
• Press Escape to save the data.
• Press “E” to exit.

Some of the baskets have a minimum blank size that they can support without special modifications or adapters. Thus, the system allows a minimum blank size crib diameter, so the generators do not crib lenses below this minimum size. This configuration allows the optimal use of the coating system baskets.

If a lab uses Coburn generators, the minimum has to be 66.0mm or higher. This entry uses the Float Setting. Depending on the lab needs, this should either have Enabled set to (N) for no minimum cribbing or the value in the Float Setting set to a value just larger than the normal block size.

To view and download these instructions as a PDF file, click on the following document image. 

Click here to return to the top of the page.