ART Blocking cut-off point

The following table supplied by SatisLoh can be used to set the default min/max radii for the ART table.

Block		Standard	Optimized for glue consumption and deformation	Optimized for glue consumption and dual minimal adhesive thick.	Standard with block 4	Optimized for glue consumption and deformation with block 4	Optimized for glue consumption and dual minimal adhesive thick. With block 4	Standard with block 2	Optimized for glue consumption and deformation with block 2	Optimized for glue consumption and dual minimal adhesive thick. With block 2	Standard with block 2 & 4	Optimized for glue consumption and deformation with block 2 & 4	Optimized for glue consumption and dual minimal adhesive thick. With block 2 & 4
#9	R60	67	67,5	66	67	67,5	66	67	67,5	66	67	67,5	66
#7	R80	85	91	88	85	91	88	85	91	88	85	91	88
#5	R110	130	135	127	121	121	113	130	135	127	121	121	113
#4	R135				154	154	141,5				154	154	141,5
#3	R180	275	261	230	275	261	230	225	225	198	225	225	198
#2	R300							375	375	306	375	375	306
#1	R500	∞	∞	∞	∞	∞	∞	∞	∞	∞	∞	∞	∞

Min adh. Center				0.5mm			0.5mm			0.5mm			0.5mm
Min adh. Edge				0.8mm			0.8mm			0.8mm			0.8mm