Click here to view the Tray Track menu.

Click here to view the complete Optifacts User Documentation Index.

Click here to contact us.

Introduction

This document provides instructions for setting up Tray Marry. This process allows you to assign with a tray. You can assign a tray to a station manually as well as using the barcode scanners.

Procedure

Setup

From the Optifacts main menu:

Select Option 7 – Tray Track and press Enter.

Select Option 12 – Tray Track Configuration and press Enter.

Select Option 2 – Sub-master Station Number Setup and press Enter.

The Tray Track Sub-Master Station Number Setup Window is displayed.

• Press ‘Q’ to Query.

Ensure that the following table below exists.

If the table does not exist:

• Press ‘A’ to add a new record.
• Enter all the information as per the example (s) below. 
• Press Escape to save the data.
• Press ‘E’ to exit.

Process

When a job comes in, and a bar code in the proper format is available, the user can use Station Assignment in tray Track to receive jobs assign the tray number to the original job.

If a tray is assigned to the original job successfully, you see that the message at the bottom of the screen tells you that the tray was updated.

You may see a message shown below if a job already has a tray number associated with it.

To view and download these instructions as a PDF file, click on the following document image.

Click here to return to the top of the page.