Introduction

This document provides instructions for adding Job Data configurations for the “Specify Block R” and “Specify Block L” lite-ups for manual block picking.

Procedure

Job Data Definitions

From the Optifacts main menu:

Select Option 3 – Editor Utilities and press Enter.

Select Option 6 – Configuration Editor and press Enter.

Select Option 7 – Edit Job Data Definitions and press Enter.

The Prompt Configuration for Miscellaneous Job-Related Data screen is displayed.

Press “Q” to Query to ensure that the tables shown in the following 2 diagrams exist.
Enter some relevant data and press Escape to perform the search.

If the tables do not exist:

Press “A” to add a new record.
Enter all the information, as shown in the following diagram.
Press Escape to save the data.
Press “E” to exit the screen.

Job Data Triggers

From the Optifacts Main Menu:

Select Option 3 – Editor Utilities and press Enter.
Select Option 6 – Configuration Editor and press Enter.
Select Option 8 – Edit Job Data Triggers and press Enter.

The Triggers to Cause Prompts for Miscellaneous Job-Related Data screen displays.

Press “Q” to Query to ensure that the tables in the following 2 diagrams exist.
Enter some relevant data and press Escape to perform the search.

If the tables do not exist:

Press “A” to add a new record.
Enter all the information, as shown in the following diagram.
Press Escape to save the data.
Press “E” to exit the screen.

The Lite-up (num) and Lite-up (bit) numbers may vary by lab. Please refer to the Retail Pricing Options Report to locate the correct numbers.

To view and download these instructions as a PDF file, click on the following document image.

Click here to return to the top of the page..

Optifacts Knowledge Base

Manual Block Picking Setup

Introduction

Procedure

Job Data Definitions

Job Data Triggers