RxUniverse Setup

To install MrOrange in RxUniverse you will need to add it as a new Serial Device. Follow the link → How to install Serial Devices

The default Com Port Setting for MrOrange are:

If you want to check the Com port settings on MrOrange you need to do so on the Tracer/Blocker combo unit

1- Click on the Essilo logo

2- Then the screen below will come up, click on Tools Icon and the Earth Shaped Icon.

3- Then you will see the Communication page information. Highlighted below is the Serial Connection information. (Note: The TCP/IP is only intend for the connection module between the Tracer/Blocker and the edger Unit)