2D et Images of Lens

Rx-Universe allows the lab to display the 2D et (Edge Thickness)  representation of the lens from Order Entry.

Within Order Entry, the button for "2D et" display is located beside the "2D" button in the Trace Information segment:

Click on the "2D et" button and Rx-Universe will perform calculation and display the example result below. If you move your mouse

around the blank you will notice the red arrow will guide you around the axis of the lens and give you the calculated thickness at that very specific point. 

If you right click on your mouse the view will change and give you the result of the Finish cut lens view.