Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 12 Current »

Search Optifacts User Documentation


Table of Contents (on this page)

Introduction

This document provides instructions for the Frame Trace and Frame to Come Lookup process when the frame trace is done before the job has started.

Procedure

Verify that Auto-assign Bin is Turned on

The following custom configuration must be enabled.

Job without Frame

  • The job gets keyed as normal without the frame.
  • Work Ticket gets set aside until the frame arrives.
  • Frame box comes from the Doctor and gets sorted in the Frame Room.
  • Frame Room goes into 7-17 and “checks in” the Frame.
  • The label gets printed and placed on the bag/box/case
  • The frame gets sent to the Tracer
  • New Work Ticket gets printed, and the job started.
  • Checked-in Frames get sent to the Frame Manager.

Job with Frame

Frame Manager

  • Frame and Lenses “Married” after the job is done in Surface/AR using scanning protocol.
    • Refer to the Frame Marry document for full instructions.
  • Job moves on to the Finishing department.

To view and download these instructions as a PDF file, click on the following document image.

  • No labels