Search Optifacts User Documentation
Table of Contents (on this page)
Introduction
This document provides instructions for setting up Tray Marry. This process allows you to assign with a tray. You can assign a tray to a station manually as well as using the barcode scanners.
Procedure
Setup
From the Optifacts main menu:
Select Option 7 – Tray Track and press Enter.
Select Option 12 – Tray Track Configuration and press Enter.
Select Option 2 – Sub-master Station Number Setup and press Enter.
The Tray Track Sub-Master Station Number Setup Window is displayed.
- Press ‘Q’ to Query.
Ensure that the following table below exists.
If the table does not exist:
- Press ‘A’ to add a new record.
- Enter all the information as per the example (s) below.
- Press Escape to save the data.
- Press ‘E’ to exit.
The station numbers vary by lab, but the station description must be ‘TRAY MARRY.’
Process
When a job comes in, and a bar code in the proper format is available, the user can use Station Assignment in tray Track to receive jobs assign the tray number to the original job.
If a tray is assigned to the original job successfully, you see that the message at the bottom of the screen tells you that the tray was updated.
You may see a message shown below if a job already has a tray number associated with it.
To view and download these instructions as a PDF file, click on the following document image.
