Search Optifacts User Documentation
Table of Contents (on this page)
Introduction
This document provides instructions for setting up the track station ‘PRICING STATION.’
Pricing Station
- This station allows you to enter lite-up options that Order Entry may have missed without going back into Order Entry.
- It works with dependency options.
- It can turn off a lite-up that was already on.
- It WILL NOT prompt for a frame price or any other hand price if the lite-up requires hand pricing or comment entry.
Procedure
Sub-Master Station Setup
From the Optifacts main menu:
Select Option 7 - Tray Track and press Enter.
Select Option 12 - Tray Track Configuration and press Enter.
Select Option 2 - Sub-Master Station Number Setup and press Enter.
The Sub-Master Station Number Setup screen is displayed.
- Press ‘Q’ to query.
- Perform a search to see if the record exists.
If it does not exist:
- Press ‘A’ to add a new record.
- Enter all the applicable data as per the following example pressing Enter past each field.
- Press Escape to save the data.
- Press ‘E’ to exit the screen.
Job Data Pricing Change Process
From the Optifacts main menu:
Select Option 7 - Tray Track and press Enter.
Select Option 7 - Station Assignment and press Enter.
The following screen displays.
- Enter the station number. This number can vary by lab. Check with your system administrator for the correct station number to enter.
- Enter the Job, Invoice, or Tray number.
The following Job-Related Data Entry screen is displayed. This screen is the same screen that an order entry operator would see when entering an order that requires additional job data.
- Enter the lite-up number that you need to add to the order. The lite-up description displays after entering the number.
The ‘Tray number 190 updated to station 1510 in track’ message gets displayed at the bottom of the screen.
- Press Escape to exit.
To view and download these instructions as a PDF file, click on the following document image.
