Search Optifacts User Documentation
Table of Contents (on this page)
Introduction
(Optional) Short Optimization calculation can be triggered via a light-up. For installations that use the feasibility screen in order entry, the calculation call will normally use feasibility. To trigger a call that would use short optimization, first add a light-up.
Procedure
Add Lite-up
From the Optifacts main menu:
Type 3 - Editor Utilities and press enter.
Type 4 - Pricing Database Editor and press enter.
Type 4 - Lite-Up Options and press enter.
Type 1 - Add/Edit Lite-Up Options and press enter.
The Add/Edit Lite-up Options screen displays.
- Enter the lite-up information as shown below. Lite-up number will vary by lab. You will need to add a lite-up number that is not being used by your lab at this time.
Are the entries correct (Y/N)?
- Type Y if correct and the data will be saved.
- Type N to return to the form.
Retail Transfer
You will now need to run the Pricing Options Available report to find the num and bit assigned to the newly created lite-up.
Type 11 - Retail Transfer and press enter.
Type 14 - Report: Price Options Available and press enter
Find the num and bit that are associated with the new light-up.
Once you know the num and bit, you can set the configurations to allow the light-up to trigger short optimization. In our example, the num is 31 and the bit is 3.
Custom Configuration
From the Optifacts main menu:
Type 3 – Editor Utilities and press enter.
Type 6 – Configuration Editor and press enter.
Type 6 – Edit Custom Configuration and press enter.
The Custom Configuration Editor displays.
- Press Q to Query to ensure that the table below exists.
- If the table does not exist:
- Type A to add a new record.
- Enter all the information as shown below.
- Press Escape to save the data.
- Type E to exit.