Search Optifacts User Documentation
Table of Contents (on this page)
Introduction
This document provides instructions for assigning a cost to lens inventory.
Procedure
From the Optifacts main menu:
Type 9 - Inventory and press enter.
Type 1 – Editor Utilities and press enter.
Type 4 – Lens Cost Changes and press enter.
The Cost Change Editor displays.
- Enter all lens details, pressing enter after each field to display the specified product. Be as specific as possible. You will not be able to proceed if the information is not entered correctly.
Example: With style SVST, NA or the applicable type code must be entered in the lens type field or it will not proceed.
The following example shows an entry for a range of lenses.
- Are these okay (Y/N)?
- Y – Yes to apply the cost.
- N – No to return to the screen.
Notes:
- If you want to price bases 0-4 differently than bases 5-8, then you have to put those costs in separately by being base specific on this screen.
- It is helpful to search for the lenses in menu 9-1-3 Lens SKU Assignment first, so that you know the lens availability and specifications before going into the lens cost change screen.
- The cost that you enter here is per pair. The system will cut the price in half when applying the price per lens.
- Press Escape to exit and return to the Optifacts Lens Inventory Editor Utilities Menu.
Click here to return to the top of the page.
