OMICS Software Inc. assumes no responsibility nor will it provide support in the configuration, support and maintenance of the proposed infrastructure below. The information given below is only intended as general guidance on how install and configured this solutions.
With RX-Universe it is possible to have a Thin Client session connecting from the outside via the Internet. It does require a few configurations that may require the local IT support to help with this.
Some client may require VPN Tunnel to meet their current security compliance, if so they will need to consult with their current IT provider for the best VPN solutions.
If VPN is not necessary we can get a remote thin client configured to access via Internet Protocol using specific port communication. (Note: This will still require the end client to consult with their current IT provider to setup this.)
The information given below is only intended for guidance on how to install this.
- A Public Static IP Address or alternatively a Dynamic DNS Service that automatically updates to the Public IP (ie:WWW.DYNDNS.ORG)
- A Static IP Address on the RX-Universe Server
- Configure the Firewall/Router to forward port 5640 to the IP of the RX-Universe Server
- Also open Incoming out outgoing traffic on Firewall or the RX-Universe Server
In the example below we are assuming that the Public IP provided by the ISP is 142.166.201.203 and that the RX-Universe Server is setup on a static IP of 192.168.1.50
