Search Optifacts User Documentation
Table of Contents (on this page)
Introduction
This document provides instructions for enabling the ENVELOPE NUMBER LOW and ENVELOPE NUMBER HIGH custom configurations.
Procedure
From the Optifacts main menu:
Select Option 3 – Editor Utilities and press Enter.
Select Option 6 – Configuration Editor and press Enter.
Select Option 6 – Edit Custom Configuration and press Enter.
The Custom Configuration Editor displays.
- Press Q to Query to ensure that the table below exists.
If the table does not exist:
- Press “A” to add a new record.
- Enter all the information applicable to your lab as shown below.
- Press Escape to save the data.
- Press “E” to exit.
You do not have to use Envelope Numbers, but they might be necessary if coating envelopes distributed with tracking numbers longer than seven digits. The tray number is limited to 7 digits in Optifacts.
Labs that send out coating envelopes can determine a sequence of envelope numbers or control numbers outside the range of trays used by the lab. If these numbers are configured as ENVELOPE NUMBER LOW and HIGH, the Basket Assignment process will accept numbers within this range for the tray number prompt. It will then look for this number in the patient name field to assign lenses to baskets.
If a lab has trays between 1000 and 9999, it can define a sequence of envelope numbers between 20000 and 30000. When envelopes come in, they can be keyed in as trays since the envelope numbers are less than seven digits long. However, if control or envelope numbers are longer than seven digits, key them in as patient names and use the Envelope Number range to allow basket assignment.
Examples
To view and download these instructions as a PDF file, click on the following document image.
