Search Optifacts User Documentation
Table of Contents (on this page)
Introduction
This document provides instructions for setting up the Dynamic Work-in-Process screen.
This is a screen that you call up and it refreshes the counts in selected stations every so often, you can set the time.
Procedure
To do the initial setup, do the following:
You need to set up the stations that you want to see on these screens first. This allows you to control which stations are grouped together and where they are displayed on the screen.
Print Master/Sub-Master Station Number Report
From the Optifacts main menu:
Type 7 - Tray Track and press enter.
Type 12 - Tray Track Configuration and press enter.
Type 6 - Master/Submaster Station Number Report and press enter.
- Type S to print on screen or P to physically print the report.
Setup
Type 7 - Tray Track and press enter.
Type 12 - Tray Track Configuration and press enter.
Type 5 - Portal Status Setup Editor and press enter.
PERFORM: Query Next Previous View Add Update Remove Table Screen
...
Shows the previous row in the Current List. ** 1: tt_dr_subhd table**
TRAY TRACK PORTAL STATUS SETUP
---------------------------------------------------------------
Sub-Master Station Number: [1060 ] PICK TICKET
---------------------------------------------------------------
Portal Id: [WIP ]
Status Code : [2 ]
Station Description : [PICK TICKET ]
Add several entries to this screen with a portal ID of WIP.
The Sub-Master Station Number holds each station you want reported within the lab.
Status Code is the relative line number on the screen.
Station Description is the text that will show on the screen.
You can have several stations mapped to the same line on the screen,
so the line will show any job at any one of the stations in the area.
For example, here are two entries for the surfacing area:
TRAY TRACK PORTAL STATUS SETUP
---------------------------------------------------------------
Sub-Master Station Number: [4060 ] TOOL ROOM
---------------------------------------------------------------
Portal Id: [WIP ]
Status Code : [4 ]
Station Description : [SURFACING ]
********************************************************
TRAY TRACK PORTAL STATUS SETUP
---------------------------------------------------------------
Sub-Master Station Number: [4030 ] SPECIAL FINING
---------------------------------------------------------------
Portal Id: [WIP ]
Status Code : [4 ]
Station Description : [SURFACING ]
Note: Keep the Status Code the same for records with the same Station
Description for consistency. Once your mapping is set up, you simply need
to choose to view the screen from the menu:
7) Tray Track
16) Dynamic Work In Process Screen
Enter Number of Minutes for Screen Refresh 30
Enter the number of minutes between times we refresh the screen. We don't
recommend small increments of time like 5 minutes because this will cause
the system to do the select statements every 5 minutes and this will use up
system resources at that time. This could slow down other processes every 5
minutes.
You can touch the Delete key to exit the screen at any time.
************************ Dynamic Work-In-Process Screen
************************
* IN OUT WIP in Station at Time
*
* Description Previous Today Today WIP 13:10
*
* ----------------------------------------------------
*
* PICK TICKET 523 1 0 524 524
*
* DELAYED 4 0 0 4 4
*
* SURFACING 23 0 0 23 23
*
*
* Previous In-Today Shipped Cancelled WIP
*
* Lab Totals: 889 0 0 0 889
*
*
* 18:10 Since Refresh: 30:00 Last Refreshed: 13:10 12/06/2004 Delete to Exit
*
****************************************************************************
****
The screen shows the Station Descriptions that you had created in the
mapping process.
Previous refers to the number of jobs that were in that station
group prior to today.
IN Today shows how many jobs have moved into
those stations since midnight.
Out Today shows the number that moved out of
those stations since midnight.
WIP is the total jobs in the station group
as a total of Previous + IN Today - OUT Today.
We will also show up to 4 columns of the WIP total for previous hours in the
day, so you can see how WIP has changed through the last 4 hours.
The Lab Totals line shows the total number of jobs including jobs that are not
mapped to specific stations above. The Lab Totals line includes the jobs
displayed above, but also includes jobs that are in stations outside of the
ones mapped for display on this screen.
