Anchor

	top
	top

Search Optifacts User Documentation

Live Search

spaceKey	OPPUB
placeholder	Enter search keyword(s) here

Table of Contents (on this page)

Table of Contents

outline	true
indent	20px
style	Bulletnone

Introduction

This document provides instructions for adding equipment to the ports and setting up the programs to run the equipment.

Procedure

It is important to remember that if additional equipment

is

gets added to the system, you must also add the interface to the Tray Tracking segment

must also be added. The equipment will not

. It is because the equipment won’t function without a tracking assignment.

This document

is separated into

describes two steps, Custom Configuration for machine interface and Tray Track Assignment for each port within the Optifacts software.

There are two methods that can be used

Two methods are available to interface the equipment to the server, direct TCP/IP or serial.

The

The TCP/IP method will communicate over the local network with the server and does not require special adapters or pinout/wiring. However, the TCP/IP method does require connecting the equipment to the same network as the Optifacts server.

The

The serial method uses a serial port connection and cable to communicate to the server through a serial device, typically one from Digi or Comtrol companies. Optifacts

communicates

communicate to the serial device over the network, but the serial device handles the serial communications to the equipment.

Contact

Contact your System Administrator or Optifacts Support

for

for the correct pinout/wiring based on the serial device for your lab.

Custom Configuration Setup

From the Optifacts main menu:

Type Select Option 3 – Editor Utilities and press enterEnter.

Type Select Option 6 – Configuration Editor and press enterEnter.

Type Select Option 6 – Edit Custom Configuration and press enterEnter.

The Custom Configuration Editor displays.Image Removed

Image Added

Add all the custom configurations required for your lab machinery. Contact your System Administrator or Optifacts Support for the correct setting for each of the machines in your lab that require interfacing.

Press Q to Query to ensure that the table below exists.

If the table does not exist:

Type A Press “A” to add a new record.
Enter all the information as per the example (s) below.
- Calling Program - STARTUP
- Field Name - Is unique, but must start with INTERFACE
- Enabled (Y/N) - Y
- Character Setting - Optifacts program and interface port information
- Float Setting - Leave blank
- Integer Setting - Leave Blank
- Comment - Description of the interface
Press Escape to save the data.
Type E Press “E” to exit.

Edger Interfaces

The following entry allows the control of the edger file formats that the system will prepare as a new tracing comes in.

Warning
* This entry overrides the edger commands that occur as part of the start-up p line for each individual tracer. *

The program uses the Character Setting Field.

Setting Flag Definitions

Here are the meanings of the setting flags:

(g) erberGerber
(w) eco - Weco **Note, don’t use this option along with (f)
(f) ive12weco- Five12weco
(c) oburn- Coburn
(s) antinelli- Santinelli
(o) ptronics- Optronics
O(m)a - OMA
(A) ck - ack **Note, this works only for the original Gerber FT-5 tracer

You may enter these letters in any combination or order. (no spaces)

Image Removed

in the character Setting field.

Image Added

Interface 0

The following entry allows

start-up

the startup of some of the

back-ground

background processes that move data to and from lab equipment. It can also be used for the Optifacts calculation module.

Image Added

Image Removed

Info

Note:

Each entry in this editor must have a unique Field Name. Thus,

simply

number the names as you add devices (e.g., INTERFACE 0, INTERFACE 1, etc.)

The Optifacts system must be enabled for enough devices

,

for them to start. For instance, if you have purchased two generator interface licenses, you can add a third entry in this table, but it won’t start.

Most equipment interfaces besides tracers require a matching entry in the job track system

in order

to start. This entry will allow Optifacts to update the tray track for the given tray when

it is

scanned at the interfaced device.

Program Examples:

The diagram below is an example of set up required to a the setup to run the program for a generator.

Image Added

The diagram below is an example of the setup to run the program for a Gerber generator.Image Removed

Image Added

The diagram below is an example of set up required the setup to run the program for a blocker.Image Removed

Image Added

Below is an example of an entry modified on this screen. However, in newer versions of Optifacts, the entry of interfaces is simplified in Menu 3-6-20. Check our documents for Add/Edit Equipment Configuration document.

Image Added

Tray Track Assignment for the Ports

From the Optifacts main menu:

Type Select Option 7 – Tray Track and press enterEnter.

Type Select Option 12 – Tray Track Configuration Editor and press enterEnter.

Type Select Option 2 – Sub-master Station Number Setup and press enterEnter.

Add the necessary Sub-Master Stations for each machine port taking care to use using the same interface that was used in the custom configuration.

Press Q “Q” to Query to ensure that the tables below exist.

If the tables do not exist:

Type A Press “A” to add a new record.

Enter all the information as per the example (s) below.

Master Station Number
Sub-Master Station Number
Station Description
Station Type - Press enter to accept N as the default entry.
Station Priority - 0 is the default priority number
Lite-up Number - Enter the desired lite-up number that is associated with this sub-master station. This It is the lite-up number seen on the pricing options page in Rx Order Entry.
Delay station
- Enter Y “Y” to indicate that this is a delay station and will stop the clock on the production time reports.
- Enter N “N” if not a delay station.
Interface Port - Enter the desired port ID for the machine interface
Naming The naming convention for machine interface (lower case only - upper case is for modem connections).
- tty - – Standard
- r - Rocket Port
- d - Digi Port
- a - The port the machinery is plugged into (a, b, c, etc.)
- 0 - Row on the port (i.e., Rocket Port has two sections--First Rocket Port will start with 0 and 1; the second Rocket Port will start with 2 and 3, etc.)
After Breakage - Set to Y “Y” if applicable. This It will require that the job pass passes through Frame Marry again after a breakage is gets posted. If For example, the frame was married and , a breakage was posted AFTER Frame Marry, the job will have to pass through the Frame to Come process again in order for a frame bin to be reassigned. If available, the same frame bin will be gets used as the first time it was processed through bin assignment.

Press escape Escape to save the data.
Type E Press “E” to exit the screen.
Press Escape to save the data.

Type E to exit

.

The diagram below is an example of the sub-master station port set up for a generator.Image Removed

Image Added

Symbol Bar Code Scanners

Job Track can have several processes running to monitor Symbol Bar Code Scanners.

In order to

To enable Symbol Scanners, you will need the following entry in menu 3-6-6.

Image Removed

Image Added

A process will need needs to be started start for each scanner on each port similarly to the way you would configure each port scanner, similar to configuring a tracer on each port.

To view and download these instructions as a PDF file, click on the following document image.

View file

name	Add Lab Equipment to Ports.pdf
height	250

Click here to return to the top of the page.

Versions Compared

Old Version 17

New Version Current

Key

Introduction

Procedure