| Anchor | ||||
|---|---|---|---|---|
|
Search Optifacts User Documentation
| Live Search | ||||
|---|---|---|---|---|
|
Table of Contents (on this page)
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
Introduction
This document provides instructions for setting up the track station “PRICING STATION”.
PRICING STATION
- This allows you to enter lite-up options that might have been missed at order entry without going back into Order Entry.
- Will work with dependency options.
- Will turn off a lite-up that was already on.
- WILL NOT prompt for a frame price or any other hand price if the lite-up requires hand pricing or comment entry.
Procedure
Sub-Master Station Setup
From the Optifacts main menu:
Type 7 - Tray Track and press enter.
Type 12 - Tray Track Configuration and press enter.
Type 2 - Sub-Master Station Number Setup and press enter.
The Sub-Master Station Number Setup screen displays.
Type Q for query.
- Perform a search to see if the record exists.
If it does not exist:
- Type A to add a new record.
- Enter all the applicable data as per the following example pressing enter past each field.
- Press escape to save the data.
- Type E to exit the screen.
Job Data Pricing Change Process
From the Optifacts main menu:
Type 7 - Tray Track and press enter.
Type 7 - Station Assignment and press enter.
The following screen displays.
- Type the station number and press enter. This number varies by lab. Check with your system administrator for the correct station number to enter.
- Type the Job, Invoice, or Tray number and press enter.
The following Job-Related Data Entry screen displays. This is the same screen that an order entry operator would see when entering an order that requires additional job data.
- The the lite-up number that you need to add to the order and press enter. The lite-up description displays after entering the number.
The "Tray number 190 updated to station 1510 in track" message displays at the bottom of the screen.
- Press escape to exit the screen.