Click here to view the Lab Configuration menu.

Click here to view the complete Optifacts User Documentation Index.

Click here to Contact us.

Introduction

This document provides instructions for defining the station numbers and descriptions used to track coating baskets, and to define the amount of lenses allowed in each basket. Once the station numbers and description are defined, then the actual basket range information must also be set up. Setting up a system for basket tracking is a multi-step process, as identified below:

Procedure

Rules

When setting up the system for basket tracking, remember these rules:

• When setting up basket names, the names should be Optifacts standards.

• When defining basket ranges, ALL numbers must be unique (must not be identical to tray range).

• When defining basket ranges, the numbers must be consecutive.

• When setting up lens count settings, you must define a low and high range. You can define up to 5 ranges.

• The Master Station and Sub-Master Station numbers used in this procedure must have already been set up in the Master Station Setup area of the software, before you attempt this procedure. If this is not done, refer to the Master & Sub-Master Station Setup document.

Custom Configurations

From the Optifacts main menu:Type 3 – Editor Utilities and press enter.Type 6 – Configuration Editor and press enter.Type 6 – Edit Custom Configuration and press enter.The Custom Configuration Editor displays.

• Press Q to Query to ensure that the tables below exist.

If the tables do not exist:

• Type A to add a new record.

• Enter all the information applicable to your lab as shown in the examples below.

• Press Escape to save the data.

• Type E to exit.

Tracking Coating Baskets

Basket Tracking requires a minimum of 4 entries in the Custom Configuration Editor. These four entries work together to track groups of lenses as they progress through the coating systems together in baskets. The 4 entries are:

• BASKET ACCOUNT

• BASKET RANGE LOW

• BASKET RANGE HIGH

• BASKET LENS COUNT

BASKET ACCOUNT

This entry is required, so the customer service staff members can have an account number that they can specify in quick look-up of job track to view the status of the coating baskets.

There must be an account set up in the Customer Database Editor that matches this account number. The account can be for internal purposes only and can be put on credit hold, so no jobs are run to it by mistake.

• Enter the account number in the Character Setting field.

BASKET RANGE LOW and BASKET RANGE HIGH

A group of basket numbers must be defined that will be unique to the baskets used in the coating process.

The examples shown below allow baskets between the numbers of 50 and 75 (both settings are inclusive).

Both entries use the Integer Setting:

BASKET LENS COUNT

Once the basket types and ranges are defined, you must define a lens count field that will identify the number of lenses you want to include in the coating baskets.

• Enter this number in the Integer Setting field.

The basket assignment procedure will allow only up to this number of lenses in any one basket.

The following example will allow 30 lenses per basket:

Station Setup

From the Optifacts Main Menu:

Type 7 – Tray Track and press enter.

Type 12 - Tray Track Configuration and press enter.

Type 2 - Sub-Master Station Number setup and press enter.

The Tray Track Sub-Master Station Number Setup screen displays.

• Enter the information as shown in the diagram below.

  • Master and Sub-master numbers may vary by lab. Check with your administrator to acquire the correct numbers to use. 

  • The Station Description MUST be typed as it appears below.

• Press escape to save the data.

• Type E to exit.

Station Assignment

From the Optifacts Main Menu:

Type 7 – Tray Track and press enter.

Type 7 – Station Assignment and press enter

The Station Assignment screen displays.

• Enter the station number for the station you have named BASKET ASSIGNMENT.

• Enter the number of the basket that you would like to fill with lenses.

The program will then repeatedly ask for tray number with lenses to coat until the basket count is reached or until you press Escape.

• Type or scan the first tray number you want to assign to this basket.

As each basket is scanned or typed, the contents of the tray are listed on the right side of the screen. 

• Repeat the Step above until you have assigned the desired trays to the basket until the maximum basket lens count identified on the screen, is reached.

When the basket lens count is reached, the "Basket is fully loaded. Touch Escape to Continue" prompt displays.

• Press Escape until you return to the Optifacts Main Menu. 

Note: To view the contents of the baskets you just assigned, perform one of these procedures:

• Go to Quick Lookup and enter the predefined account number for basket tracking, and view history on the desired trays.

• Or, look up the tray by the account number under which it was entered. 

BASKET RANGE LOW 1-5

BASKET RANGE HIGH 1-5

BASKET LENS COUNT 1-5

Some coating centers have baskets of different sizes for different operations.  We allow up to 5 basket sizes for any lab. 

The following example could allow two sets of baskets, the first ten baskets numbered between 50 and 59 allow up to 20 lenses per basket.  The next set, are smaller baskets and only allow 15 lenses each.

Examples

BASKET RANGE LOW 1                           50

BASKET RANGE HIGH 1                          59

BASKET LENS COUNT 1                          20

BASKET RANGE LOW 2                           60

BASKET RANGE HIGH 2                          69

BASKET LENS COUNT 2                          15

Image Modified

Click here to return to the top of the page.