| Anchor | ||||
|---|---|---|---|---|
|
Search Optifacts User Documentation
| Live Search | ||||
|---|---|---|---|---|
|
Table of Contents (on this page)
| Table of Contents | ||||
|---|---|---|---|---|
|
Introduction
This document provides instructions for entering an supplied (enclosed) lens through Order Entry. These are lenses that your customer has sent in to you for processing such as edging or coating and you do not want to decrement lens inventory for this type of job.
Procedure
From the Optifacts main menu:
Type 4 - Run Layout and press enter.
The Tray & Acct window displays.
- Enter all the appropriate information on the Tray & Acct window.
The CBT Selection window displays. (Refer to the Commercial Branding Tool (CBT) section for further details.)
- Make your selection and press enter to continue.
Once the CBT selection is complete, the Rx window displays.
- Type S at the STYLE W/SEG SZ field and press enter.
Special Entry
The Special Entry window displays.
- Type ER to indicate Enclosed Right, EL to indicate Enclosed Left, or EB to indicate both Enclosed.
The selected entry displays.
- Press escape to return to the STYLE W/SEG SZ field.
If you have selected only one lens to be enclosed you will see the following message:
- Enter the applicable data and continue the layout process until the pricing options screen displays.
The Enclosed R, Enclosed L or Supplied Lens (for both) pricing option will be highlighted automatically based upon the special entry selection.
- Continue the layout process.