Anchor | ||||
---|---|---|---|---|
|
Search Optifacts User Documentation
Live Search | ||||
---|---|---|---|---|
|
Table of Contents (on this page)
Table of Contents | ||||
---|---|---|---|---|
|
Introduction
This document provides instructions for adding entries to the Manufacturer Substitution table. This allows the lab to substitute the Mfr code for a specific SKU or to substitute one Mfr code for another.
Procedure
From the Optifacts main menu:
Type 9 - Inventory and press enter.
Type 4 - EOE Procedures and press enter.
The following screen displays: (This screen will display only if your lab is setup for multiple warehouses.)
- Enter the applicable Warehouse ID and press enter.
- Type 9 - Manufacturer Substitution Editor and press enter.
- Type the Warehouse ID and press enter. (This option will display only if your lab is setup for multiple warehouses.)
- Type the original SKU code or Mfr code and press enter. (The "Original SKU Code or Mfr" field can hold either a 10 digit SKU number or a manufacturer code. The substitution routine will look for a matching SKU code first. If a SKU is not found, the routine will then look for a matching Mfr code.)
- Enter the Mfr code to substitute.
- Press Escape to save the data.
- Type E to exit.
Click here to return to the top of the page.