OMICS Software Inc. assumes no responsibility nor will it provide support in the configuration, support and maintenance of , configuration & maintenance on the proposed infrastructure below. The information given below is only intended as general guidance on "how to" install and configured this these solutions.
With RX-Universe it is possible to have a Thin Client session connecting from the outside via the Internet. It does require a few configurations that may require the local IT support to help with this.
...
If VPN is not necessary we can get a remote thin client configured to access via Internet Protocol using specific port communication. (Note: This will also still require the end client to consult with their current IT provider to setup this.)
...
In the example below we are assuming that the Public IP provided by the ISP is 142.166.201.203 and that the RX-Universe Server is setup on a static IP of 192.168.1.50
Installing using VPN
- Install and configure the VPN client at the remote site, confirm you can connect correctly
- Install RX-Universe Thin Client
- Change the IP address in the Thin Client to the RX-Universe Server
Installing using Internet Protocol
Install and configure the RX-Universe Thin Client on the remote PC
Configured the properties of the RX-U Thin client to connect to the PUBLIC IP or Dynamic DNS Name. (do not change the port #)