Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Search Optifacts User Documentation


Table of Contents (on this page)


Introduction

This document provides instructions for adding Job Data configurations for the Specify Block R and Specify Block L lite-ups for manual block picking.

Procedure

Job Data Definitions

From the Optifacts main menu:

Type 3 – Editor Utilities and press enter.

Type 6 – Configuration Editor and press enter.

Type 7 – Edit Job Data Definitions and press enter.

The Prompt Configuration for Miscellaneous Job Related Data screen displays.

  • Press Q to Query.
  • Ensure that the tables below exist. If the tables do not exist:
    • Type A to add a new record.
    • Enter all the information as per the example (s) below.
    • Press Escape to save the data.
    • Type E to exit the screen.

Job Data Triggers

From the Optifacts Main Menu:

Type 3 – Editor Utilities and press enter.

Type 6 – Configuration Editor and press enter.

Type 8 – Edit Job Data Triggers and press enter.

The Triggers to Cause Prompts for Miscellaneous Job Related Data screen displays.

  • Press Q to Query.
  • Ensure that the tables below exist. If the tables do not exist:
    • Type A to add a new record.
    • Enter all the information as per the example (s) below.
    • Press Escape to save the data.
    • Type E to exit the screen.

NOTE: The Lite-up (num) and Lite-up (bit) numbers may vary by lab. Please refer to the Retail Pricing Options Report to locate the correct numbers.


  • No labels