Search Optifacts User Documentation
Table of Contents (on this page)
Introduction
This document provides instructions for adding Job Data configurations for the “Specify Crib R” and “Specify Crib L” lite-ups for manual crib specification.
Procedure
Job Data Definitions
From the Optifacts main menu:
Select Option 3 – Editor Utilities and press Enter.
Select Option 6 – Configuration Editor and press Enter.
Select Option 7 – Edit Job Data Definitions and press Enter.
The Prompt Configuration for Miscellaneous Job-Related Data screen is displayed.
- Press “Q” to Query to ensure that the tables below exist.
If the tables do not exist:
- Press “A” to add a new record.
- Enter all the information, as shown in the following 2 diagrams.
- Press Escape to save the data.
- Press “E” to exit.
Job Data Triggers
From the Optifacts Main Menu:
Select Option 3 – Editor Utilities and press Enter.
Select Option 6 – Configuration Editor and press Enter.
Select Option 8 – Edit Job Data Triggers and press Enter.
The Triggers to Cause Prompts for Miscellaneous Job-Related Data screen displays.
- Press “Q” to Query to ensure that the tables below exist.
If the tables do not exist:
- Press “A” to add a new record.
- Enter all the information, as shown in the following 2 diagrams.
- Press Escape to save the data.
- Press “E” to exit.
The Lite-up (num) and Lite-up (bit) numbers may vary by lab. Please refer to the Retail Pricing Options Report to locate the correct numbers.
To view and download these instructions as a PDF file, click on the following document image.
