To be released soon....
Digital Interfaces
For Zeiss digital, multiple LDPATH files are returned and the correct one chosen based on a combination of type, vendor and model. In some cases, the file was not being sent to the generator. This has been corrected (version 7.02.01).
A new label, _TEMPORALADD, has been added for Crossbows (version 7.02.01).
Eyezen jobs (and other digital SV with a fitting height and a fitting cross) were not sending the correct values for segment location to the Gerber Step2 blocker (FSEGDN value). This has been corrected (version 7.02.02).
When a frame type is present and also thickness exceptions for tint/treat (ie polarized), the frame thickness will take precedence; it should be the thickest of the possible options that gets used (affects MINEDG and MINCTR labels). Added support for PLRCRV and PLRLOC labels (version 7.03.00).
Essilor Latam wants to be able to send different ENGMARK records for different devices; for example, one set of ENGMARK records for an Orbit and a different set for a laser. In addition, there could be some ENGMARK records in common for both. Made changes to save ENGMARK records from the main section of the LMS file (outside any LDCRYPT blocks) and also to save ENGMARK records that are sent within LDCRYPT blocks for specific devices. For the DEO:VFT block, the records are saved for all device GEN types; for DEO:LASEROPLM3, the records are saved for ENG session type; any other DEO: value, the records are saved for the session type that follows DEO:. ENGMARK records outside of LDCRYPT blocks are saved with no specific device type (so will be sent to any device requesting ENGMARK) (version 7.03.00).
A new label, CLNVB, has been added for Varilux X products (version 7.03.00).
The ELLH, for uncuts without frame, were defaulting to 2mm larger than the block size instead of defaulting to the crib size. This has been corrected (version 7.03.00).
Database Changes
A new check box,”Use _TEMPORALADD”, has been added to the “Optional Fields” tab for the Lens Style database (version 7.02.01).
A new NVB parameter has been added to the “Optional Fields” tab for the Lens Style database. It is used for Varilux X products (version 7.03.00).
The VCA Label Table Settings database has been modified to enable lookup by LNAM value for Essilor (version 7.03.00).
“Uncut No Frame” has been added as a default Job Type to the Customers database (version 7.03.00).
Order Entry
Order Entry was modified to no longer allow a user-specified center thickness of zero (version 7.02.01).
In order entry, the date wanted could be earlier than the date received. This has been corrected (version 7.03.00).
If the WRAP flag is turned off on order, then do not print the ZTILT, PANTO, or vertex info on the compensated line of the PCL an PCI work tickets (version 7.03.00).
The program that draws pattern graphics on the screen has been modified to prevent windows locale settings from affecting decimal point format (version 7.03.00).
The Surfacing Option screen in order entry has been modified to add a new NVB parameter, which is used for Varilux X products (version 7.03.00).
When no PD was entered for an uncut with frame, the DBL was being set to zero. This has been corrected (version 7.03.00).
When entering a right eye only job, the left eye decentration/PD field was accessible and caused the calculations to return an error. This has been corrected (version 7.03.00).
System Settings
The “Use 2017 Email program” variable on the E-mail tab in System Settings was not being saved. This has been corrected (version 7.02.02).
Inventory
A new “Lens Receiving without PO” option has been added (version 7.03.00).
Purchase orders have been modified to add “Release All PO’s” functionality (version 7.03.00).
A new option has been added – “Initial Load Discontinued Lenses” (version 7.03.00).
Job Tracking
Fixed issue with 2-way job tracking scanning. It was only checking lens and frame pick for addon jobs. Now checks for all services (version 7.03.00).
Report Changes
The "Job Summary Report” has been modified to add material breakdown (version 7.02.01).
A new “High Breakage Report” has been added to the “Orders in Process” menu under “Order Reports” (version 7.02.01).
A new “Sales by Material Report” has been added to the “Completed Orders” menu under “Order Reports” (version 7.02.02).
Two new reports have been added to the menu under “Order Reports”; “Daily Customer Order Report (Detail)” and “Daily Customer Order Report (Summary)”. The “Daily Job Report” has been renamed to “Daily Order Report” (version 7.02.02).
The three A/R reports, “Ageing Report”, “Sales Analysis Report” and “Payment Detail Report”, have been modified to add the ability to create a CSV file (version 7.02.02).
Three Orders in Progress reports have been modified to add the ability to create a CSV file; “Late Jobs in Progress Report”, “Hot Jobs Report” and “Special Jobs Report”. These reports have also been renamed to use the word “Orders” instead of “Jobs” (version 7.02.02).
The “Digital Report” has been modified to include the Customer Name in the Customer drop down list and also fixed an issue where not all settings were being saved for “Saved Report Settings” (version 7.02.02).
The Report Database has been modified to increase the size of the Name field (version 7.03.00).
The “High Breakage Report” has been modified to add employee code to the report (version 7.03.00).
Modified the “Inventory Valuation Report” to remove the Average Cost column as it is not needed for this report. Also fixed an issue where the starting/ending vendor and starting/ending bin were not being saved in the Saved Report Settings (version 7.03.00).
The “Inventory Transaction Report”, “Inventory Return Report” and “Unused Inventory Report” have been modified to add the ability to create a CSV file (version 7.03.00).
The “Inventory Breakage Report” was not saving the starting/ending vendor and starting/ending bin in the Saved Report Settings. This has been corrected (version 7.03.00).