to be released ….
Reports
Orders Production Report - Breakage
Fixed an issue where the Lenses Shipped Today/Frames Shipped Today counts sometimes included orders that were shipped on previous days.
If using Breakage Sub Codes the Department column will now include the department description
ViStar Production Statistics Report
Fixed an issue where DAYS/JOB column was calculated incorrectly when running the report for a single customer
Fixed an issue where the total breakages could be calculate wrong if there were more than 50 breakages reasons included on the report
Fixed an issue where the report would lock up when trying to count orders with different materials for each lens
The Lens Breakage table will now be in alphabetical order
If using Breakage Subcodes the Lens Breakage table will now group breakages under “Department Description - Reason Description”, omitting the Shift and Position.
When XSL templates are used for a report, if the report size is large, it would give a message and exit the report. This has been enhanced to give the user a choice to try and print it, or abandon the report.
Printer Routing
Added new conditions (see Setting Up Routing Rules - Rx-Universe - Confluence (atlassian.net))
Add <=
|Cylinder| <=
Prism <=
FRNT >=
FRNT <=
A <=
A >=
B <=
B <=
CRIB <=
CRIB >=
ELLH <=
ELLH >=
GBASE <=
GBASE >=
GCROS <=
GCROS >=
_LOHPRVM >=
_LOHPRVM <=
BACK >=
BACK <=
BCTHK >=
BCTHK <=
CTHNP >=
CTHNP <=
Has Trace
Has No Trace
Renamed some conditions
“Mat Type =” is now “Material Type =”
“Style Group =” is now “Lens Style Group =”
“Is Priority” is now “Is Hot Job”
“Stock Num =” is now “Lens Stock Num =”
“N/A” is now “(none)”
Changed the order of the condition dropdown to put related conditions closer together
The condition called "Sphere <=" has been renamed to "All Spheres <=" to make the behavior more clear.
Added new condition "Either Sphere <="
Added new condition “Lens Stock Status =“
Added new condition “Frame Stock Status =“
Inventory
Lens adjustments
When adjusting down, modified to not allow the on-hand quantity go below the in-process quantity.
Lens picking
If partial picking is active, the program always required a left lens be entered
API
Fixed an issue where calling GET /rxsite/stockfinished with a larger value than the total number of available records would generate invalid JSON.
GET /rxsite/stockfinished now accepts an optional parameter called lastChangedDate that allows you to only retrieve lenses changed since a particular date.
Fixed an issue with GET /orders/cust where calling the endpoint with the designated VSP account included deleted orders and could list orders more than once.
Fixed an issue where job status was not being returned for completed orders completed in a previous day
Fixed an issue where GET/frames/trace failed when the requested trace had > 1000 points
User defined documents
This includes the XML work tickets, the AR Envelope, the Trace-only Work ticket and the Additional documents.
The printing of the user defined documents will now check the associated switches to determine what paper size will be sent to the printer. It will be either letter size, A4 size or get the size from the resulting PDF.
Device Parameters
Added a new flag in the Edger tab for OMA device. The flag allows the LDPRVM label to be overridden by the PRVM value when an OMA device communicates with RxUniverse.
Devices
VCA devices. The following labels have been added for use by devices, CTHNA, CTHKP, CTHKA. These labels along with CTHNP and PTPRVA can return values for digital or toric type order.
VCA tracer - when auto-attaching a trace, if the exiting trace on an order is set to calcs only, the trace being attached is saved as an INV# trace. The frame type was not being cleared when it should have. If the original trace on the order is not an “INV#” or “FTD” trace, keep the existing trace parameters when saving the attached trace as an “INV#”.
When a tracer auto-attaches a trace and the order is set to re-calculate, the selecting of blanks has now been de-activated and only the finishing calculations will be updated.
The auto-attach trace feature was not working when the tracer sends a 6-digit order number. This has been rectified.
Customer Service
A new search key has been added to the “Select Key” field. It is called “Last Modified YYYYMMDD;hhmm”. This new key will allow the user to list the orders based on the last date/ time they were modified. The new last date time field can be viewed in the “View Order Flags” also.
The key search by patient name is no longer case sensitive.
Lens assignment to Bin
This new feature works the same as the Frame assignment to bin. It allows the placing of the lenses for an order into a holding bin until the frame is received. It creates a Job tracking entry to station “LNS”.
Order Entry
Under certain conditions, modifying an order could create extra traces that were not valid.
Worktickets
XML workticket generation now respects the Mirror attribute when rendering traces.
Added tags _DUEDATE_YYYYMMDD, _DUEDATE_MMDD, _DUEDATE_DD _ACTUALCRIB
New labels have been added that can be used on the “User defined work tickets”. The new labels report the last lens breakage and the number of times that the order went through a lens breakage. The Labels are _RTBKG and _LTBKG
New labels have been added to show what printer routing rule was used to route an order. These are _ROUTER (the comment of the routing rule that was applied) and _ROUTEC (a description of the rule)
Remote Orders
When a frame-to-follow order was received, if there was a frame from frame inventory selected for the order, the tracing used on the frame inventory was not being used if a default trace was available.
An issue where TRCFMT was being ignored in the raw file has been fixed.
Shipping
When processing, if the order is not pending completion, set all pending completion fields required to complete the order.
Digital processing
The following labels can now store values received from the digital processing CTHNP, CTHNA, CTHKP, CTHKA and PTPRVA.
Tracings
When auto-attaching a trace, if the order had a trace already, keep the original trace parameters.