Options to have different cooling times for both Essilor digital jobs (when using Essilor blocks), and for glass jobs (since glass doesn’t need to cool near as long) have been added to the Blocker tab of the device setup:
Support for the LensMarkJobBuilder.exe program (from LaserOp), used many years ago before the LaserOp engravers were VC-compliant, has been removed. This removes the fields for the LML and PARM files from the Digital Type setup, as well as the "LaserOp MATID" table (version 6.52.00).
Sag data (topography charts) for traditional progressive or aspheric blanks is stored, in Rx-Universe, in 1.53 index. When a lab converts their lens technical data to a different index, this can cause the lookup of the sag data to fail. Starting in version 6.52.00, true curves are converted to 1.53 index when looking up the sag data, to avoid this problem. Note that this is an internal change, which has no impact on the lab's data or lab operation (except that the lookup will now correctly find the sagitta height of the front curve).
Options to have different cooling times for both Essilor digital jobs (when using Essilor blocks), and for glass jobs (since glass doesn’t need to cool near as long) have been added to the Blocker tab of the device setup.