Version 6.37.00
Order Entry
A problem where the 2D graphics would sometimes show the results of a previous calculation, rather than the current calculation, has been corrected (version 6.37.00).
A cylinder axis of 0 can now be entered (same axis as 180) (version 6.37.00).
An occasional problem with the calculation of ELLH for the left eye only has been corrected (version 6.37.00).
New labels ELLH and _SUPELLH have been added to the labels supported by the raw file. ELLH allows the file to specify the elliptical cribbing height, and _SUPELLH=Y or _SUPELLH can be used to suppress elliptical cribbing for a job (version 6.37.00).
When using pricing, users can be set up so they cannot view pricing, using a new checkbox on the user screen:
Uncuts
Handling of uncuts in Rx-Universe has been both simplified and enhanced. Please see the section on Uncuts for complete information on the changes (version 6.37.00).
Digital Surfacing
When a digital processor returns both warning and error messages in XSTATUS lines, precedence is now given to error messages to print as the default message on the work ticket. Warning messages are still retained and printed, but the error message is the "main" message (vesion 6.37.00).
The SignetRx digital interface has been enhanced to support printing of the Kodak Unique ticket using their ticket printer. See the section on Signet Digital Surfacing for complete details (version 6.37.00).
Devices
When using Nucleo or ART blocking, the lens type of the donor blank is now checked to determine if recalculation should be one. Previously, the design was being checked, which could result in a progressive design, using a SV donor blank, not being checked when only the SV type is triggered for front curve check (version 6.37.00).
A new flag has been added to device setup to allow label SBSGUP to be reversed for a device. This was added to provide compatibility with older SatisLoh blockers. When checked, this causes the SBSGUP to be reversed only for non-progressive multifocals, on this device interface only. 
Minimum, maximum and default values can now be specified for panoramic and pantoscopic angles for individual lens styles. On the lens style screen, these values will over-ride the system values for the particular lens style:
Job Tracking
The "Job Simulator Scanner" screen has been enhanced to support both 2-way communication (as it has always worked in the past), and new 1-way functionality. With 1-way functionality, the lab can use a "super-user" code to set flags without requiring validation of the scan (version 6.37.00).
Traces
Traces can now be set up as "calculation-only" - used for calculations to ensure accurate thickness results, but not used for edging. Traces can be set up this way using a new checkbox on the trace record:
If a trace marked as calculation-only is used on an order, and that order requested on a finish blocker or edger, the data on the order will not be sent, and a status message indicating no trace is present will be sent (to devices which support messages).
Such traces can also be re-sized dynamically; on the order entry screen, a new A or Circumference can be entered:
If an order is sent electronically using a raw file, it can similarly be re-sized by specifying a different A value (HBOX).
XFD files (ODBC access)
OMGND.XFD
OMLENS.XFD
OMFREE.XFD
OMJTS.XFD
OMPAT_NO_TRACE.XFD
------------------
Add changes to the Gen-dev file, the Lens Style file, the Digitial Surface Type file, the Job Track Station file and the Pattern file.
OMGND.XFD - Added new fields:
GND-SBSGUP-SW
OMLENS.XFD - Added new fields:
LN-MIN-PANTO
LN-MAX-PANTO
LN-DFLT-WRAP
LN-DFLT-PANTO
OMLENS.XFD - Modified fields:
Changed LN-MIN-WRAP from numeric to alpha-numeric
Changed LN-MAX-WRAP from numeric to alpha-numeric
OMFREE.XFD - Added new fields:
WS-FREE-SIGNET-TKT-FILE
WS-FREE-SIGNET-TKT-FOLDER
OMJTS.XFD - Added new fields:
JS-2WAY-SCANNING-SW
JS-CREATE-SIGNET-TKT-FILE
OMPAT_NO_TRACE.XFD - Added new fields:
PTRN-CALCULATION-ONLY-SW