Beginning with version 7.10.00, Rx-Universe allows labs to print AR envelopes designed with Satisloh's LOHreport program.
The LOHreport program produces a template in XML format; to use a template designed in LOHreport, place the resulting XML file into the RX-XML subfolder (under the root Rx-Universe folder).
Please note that the LOHreport program must be obtained from Satisloh - this program is not provided with Rx-Universe.
Set Up Rx-Universe for User-Defined AR Envelopes
First, the XML file(s) produced by LOHreport (these are the templates) should be placed into folder RX-XML under the RxUniverse folder.
In Rx-Universe, on the Orders1 tab, set up the work ticket type as "XML", and then select the name of the work ticket to use:
VCA Labels In LOHreport templates
There are a few differences in VCA labels used in AR envelope templates for Rx-Universe versus those used in Rx-Pert or AF-Client:
RXNM - because the VCA label JOB has specific use in interfaces, please use RXNM instead of JOB for the job number. In Rx-Universe, this will print the order number of the job.
_DATE will print the date the AR envelope is printed
_DATE_TIME will print the date and time the AR envelope is printed
_TRAY - prints the tray number
_LAB_NAME - prints your lab name
_LAB_ADDRESS_1 - prints address line 1 of your lab
_LAB_ADDRESS_2 - prints address line 2 of your lab
_LAB_ADDRESS_3 - prints address line 3 of your lab
_LAB_POSTAL - prints the postal/zip code of the lab where the AR coating will be applied
_LAB_PHONE - prints the phone number of the lab where the AR coating will be applied
_UNCUT_DESC - prints the text "UNCUT" when the job is an Uncut\
_RL_AR_REFERENCE - prints the reference number for the AR envelope.
_RL_ACCT_NUM - prints
_LAB_NAME - prints the name of the lab where the AR coating will be applied
_LAB_ADDRESS_1 - prints address line 1 of the lab where the AR coating will be applied
_LAB_ADDRESS_2 - prints address line 2 of the lab where the AR coating will be applied
_LAB_ADDRESS_3 - prints address line 3 of the lab where the AR coating will be applied
_LAB_POSTAL - prints the postal/zip code of the lab where the AR coating will be applied
_ADD_TEXT - prints the text "Add:"
_NPD_TEXT - prints the text "Monocular NPD (L/R)"
_SEGHT_TEXT - prints the text "Seg Height (L/R)"
_TINT - prints the factory tint on the lens (ie GY3)
_TREAT - (or FCOAT) prints the factory coating that is on the lens (ie TR7)
_MATERIAL - prints the material code of the lens
_ADDON - returns up to 15 addon codes corresponding to addons on the order
_ADDONDESC - returns up to 15 addon descriptioons corresponding to the addons on the order
_ARDESC - returns the description of any AR coating on the job (blank if no AR coating)
_STOCKDESC - returns the inventory description of the blanks for a job
_LOHPRVM - returns the amount of prism to be blocked/generated in angular degrees
_LOHPRVA - returns the angle of prism to be blocked/generated
_ETYPDESC - returns the description of the edge type of the order (from the frame type file)
_JOBTYPE - returns the text of the type of job (Cut&Edge, Uncut with frame, uncut no frame)
_MATDESC - returns the full material description (including tints and treatments)
_POLISHDESC - returns the text for polish instructions (polish edges, edges and pin bevel, etc).
_RPRVM1 and _RPRVM2 - amount of prescribed prism on the job
_RPRVA1 and _RPRVA2 - direction of prescribed prism as on the job - In, Out, Up and Out, or the specific angle (if entered that way)
Trace Data
There are 4 ways to print frame trace data (the names below each example are what should be entered in the "Name" field of the shape box in the work ticket ticket template.
 |  |
|---|---|
| TRACE_ONLY | TRACE_W_THICK |
 |  |
| TRACE_W_CRIB | TRACE_W_THICK_CRIB |
Note that if printing both sides of the frame is desired, you can use TRACE_ONLY (or any of the other options) for one eye, and TRACE_ONLY2 (or any of the other options, with a "2" appended), to avoid an error in LOHreport of a duplicate field name.