Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 9 Next »

Order Entry

Updated the Error 302 to indicate the use of “99xxx” for tray number is not allowed.

Viewing of Lens style will now load the screen filtered by Active Fields first.

Fixed an issue where Additional Documents, when set to “Print at OE if digital” or “Print at OE if digital or toric” did not work.

When using both crib groups (for fixed AR rings, for example), and also using dynamic blocking ring selecting, the blocking ring was previously selected before the crib was calculated with the crib group. This has been reversed; the blocking ring is now selected after the crib group rules are applied.

Fixed an issue where the assigned bin from an order is being copied to the copied/remaked order causing the bin to be assigned on both orders.

Blank Selection

Fixed an issue where the addons in the primary section of blank selection substitution were not being taken into consideration.

API Endpoints

  • POST / orders/add - the endpoint has been enhanced to allow a frame tracing file to be received along with the order.

Manufacturer

Fix the bug where the “Use SFTP” is not being cleared when the order method is changed from FTP.

XML Exports

Fixed an issue where Number Days Late may have incorrect information.

MES

Improved logging during JSON communication

Lens

Fixed an issue whereas the Pantoscopic tilt angle is being saved even outside of accepted ranged.

  • No labels