Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 13 Next »

to be released ….

Customer Service

Don’t allow Rx-universe to delete orders if the enhanced breakage logic is active.

Devices

  • TCP device sessions, check the system setting to determine if the device IP will be used to find the correct communication session or just the session handle.

  • VCA device interface - the interface now handles numbers from 9-20 for orphaned traces without truncating them to 12 digits

Job Stations

A new flag has been added that will allow an outsourced order to be scanned at the station and have the order set to verified if it is not already.

System Settings

A new flag has been added to the “Devices” tab “Check the device IP when communicating”. This flag has the effect of making the device session verify the device IP to locate the correct communication session.

A new flag has been added to the “Digital” tab “Use Digital processor log”. This flag will cause the digital processor to create a log file for support technician troubleshooting.

Endpoints

  • GET/orders/detail - added new flags for “orderCompleted”, “orderDeleted” and “orderHold”.

  • POST/orders/cancel - endpoint now allows order with frame inventory items to be processed. The lens breakage has been removed.

  • POST/orders/printWorkTicket - the endpoint has been modified to allow the selection of a printer port for the printing of the user defined work ticket.

Packing Slips

The Print Open Packing Slips function has been enhanced to ask for the shipping method. Only the packing slips matching the Ship Method will be processed and printed.

Remote Order

Fixed an issue that was causing unvalid order to allocate lenses.

Purchase Orders

Under certain circumstances, the quantities to order for special order lenses could be higher than required. This has been corrected.

Traces

When importing a trace from an OMA file, if the file contained Z points greater than 512 points the Z points were not saved on the trace.

Digital Processor

The ability to log various program locations has been added to the processor.

  • No labels