Search Optifacts User Documentation
Table of Contents (on this page)
Introduction
This document provides instructions for adding Job Data configurations for the Specify Block R and Specify Block L lite-ups for manual block picking.
Procedure
Job Data Definitions
From the Optifacts main menu:
Type 3 – Editor Utilities and press enter.
Type 6 – Configuration Editor and press enter.
Type 7 – Edit Job Data Definitions and press enter.
The Prompt Configuration for Miscellaneous Job Related Data screen displays.
- Press Q to Query to ensure that the tables below exist.
- If the tables do not exist:
- Type A to add a new record.
- Enter all the information as shown below.
- Press Escape to save the data.
- Type E to exit the screen.
Job Data Triggers
From the Optifacts Main Menu:
Type 3 – Editor Utilities and press enter.
Type 6 – Configuration Editor and press enter.
Type 8 – Edit Job Data Triggers and press enter.
The Triggers to Cause Prompts for Miscellaneous Job Related Data screen displays.
- Press Q to Query to ensure that the tables below exist.
- If the tables do not exist:
- Type A to add a new record.
- Enter all the information as shown below.
- Press Escape to save the data.
- Type E to exit the screen.
Note: The Lite-up (num) and Lite-up (bit) numbers may vary by lab. Please refer to the Retail Pricing Options Report to locate the correct numbers.
