Search Optifacts User Documentation
Table of Contents (on this page)
Introduction
(Optional) Enable this record to block the job if the mounting height is invalid; with the record disabled an invalid mounting height will only warn the operator.
Procedure
From the Optifacts main menu:
Type 3 – Editor Utilities and press enter.
Type 6 – Configuration Editor and press enter.
Type 6 – Edit Custom Configuration and press enter.
The Custom Configuration Editor displays.
- Press Q to Query to ensure that the table below exists.
If the table does not exist:
- Type A to add a new record.
- Enter all the information as shown in the example below.
- Press Escape to save the data.
- Type E to exit.
