...
A new parameter has been added to the VCA Label Table entries - different values for a VCA label can now be set for an entry depending on whether the order requires an applied tint or not (similar to how different codes can exist for orders with and without A/R). This allows, among other possibilities, the use of different LNAM codes for Essilor Digital designs and labs that make use of SBF (Smart Blue Filter) blanks. Because these lenses cannot be tinted, different LNAM codes need to be sent to Essilor depending on whether the order has a tint to be applied or not. For complete details, please see SBF Blanks (version 6.48.00).
A change was made to the handling of LMS files to use the filename of the file when the LMS file is returned without a JOB= line (this happens with Hoya digital for some error messages only) (version 6.48.00).
Order Entry
When the tray number is changed on the Order Entry screen, calcs are required so that the OMGEN record gets updated (version 6.47.02).
...
Rx-Universe now support user-specified center thickness for all jobs. For complete details, please see Thickness On An Order (version 6.48.00).
The "Filter lenses by availability" now works for digital designs as well as toric designs. If the digital designs are set up in a VCA label table (for example, Essilor), then the availability is limited to the entries from the associated VCA label table. If the digital designs are set up to use alias entries, the materials available are filtered based on the materials available for the alias lens style. No filtering is done by colour or pretreatment in this case (version 6.48.00).