| Anchor | ||||
|---|---|---|---|---|
|
Search Optifacts User Documentation
| Live Search | ||||
|---|---|---|---|---|
|
Table of Contents (on this page)
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
Introduction
This document provides instructions for placing a job on hold using a tray track station.
The jobYou can still
be enteredenter the job and the lenses produced, but it will
be stoppedstop at the mailout station. Once the stations
are setupget set up, the lab can
usinguse the Station Assignment screen to put a job on hold without
having to recallrecalling it in Rx Order Entry.
Note: The| Info |
|---|
You must set up the lite-up, job definition, and trigger |
before you can use this process to place a job on hold. |
Refer to Hold Job Setup using a Lite-up, Job Data Definitions and Triggers document for setup instructions. |
Procedure
Setup Sub-master Tracking Station
From the Optifacts main menu:
Type Select Option 7 - Tray Track and press enterEnter.
Type Select Option 12 - Tray Track Configuration and press enterEnter.
Type Select Option 2 - Sub-Master Station Number Setup and press enterEnter.
The Sub-Master Station Number Setup screen displaysis displayed.
- Press “Q” to query.
Search for the sub-master station numbers or descriptions as determined by your system administrator.
- Enter the predetermined number in the master station number field, or enter the predetermined number or description in the applicable appropriate fields.
- Press escape Escape to show the results.
If the entries do not exist:
- Press A “A” to add a record.
| Info |
|---|
The Master Station must be set up before adding a Sub-Master Station. Refer to |
the Master & Sub-Master Station Setup document for |
complete details. |
- Enter the information as As shown in the diagram below, enter the information using the correct lite-up number for 'HOLD “HOLD JOB'. Lite” Lite-up numbers vary by lab. Please make Make sure you are using the correct lite-up number.
- Press escape Escape to save the data.
| Info |
|---|
You may |
set up several hold stations. |
For example, you can create different sub-master stations using a different station number and |
description but point them all to the same |
‘HOLD JOB’ lite-up. |
Example:
The station number and description are different
thanfrom the one created above but
isalso
pointingpoint to lite-up number 124.
Once the stations are setupset up, the lab can using use the Station Assignment screen to put a job on hold without having to recall recalling it in Rx Order Entry. Refer to the Station Assignment Process document for details.
To view and download these instructions as a PDF file, click on the following document image.
| View file | ||||
|---|---|---|---|---|
|