to be released ……13 December 2021
API endpoints
Fix issue with the lens breakage API. On some computers, a memory access violation was occurring. This has been resolved.
...
The following new tags have been added:
_ACCN_ADDR1 - address line 1 of the customer who ordered the job
_ACCN_ADDR2 - address line 2 of the customer who ordered the job
_ACCN_ADDR3 - address line 3 of the customer who ordered the job
_ACCN_ADDR4 - address line 3 4 of the customer who ordered the job
_ACCN_POSTAL - postal code of the customer who ordered the job
...
Changed ART blocker interface so we do not send "Too much prism" error unless the generator reserve prism field is > 0
A Briot tracer uploads FTYP=3 and ETYP=2 for a drill-mount frame, but only FTYP=3 with no ETYP for a groove frame. Changed the tracer interface to recognize this situation and interpret the uploaded trace as a groove edge type.
When the VCA device interface auto-attaches a trace to an order that has SEGDHT values in it, if the order was for a Single Vision prescription, the resulting Vertical decentration was being placed in the SEGHT field instead. This has been resolved.
The VCA device interface has been modified to not store the GPRVM and GPRVA labels when they are returned from a digital vendor, if the value they contain is “?”.
If no prism is being reserved for the generator when using ART blocking, then for the ART-M, the GPRVM sent to it must reflect that fact by sending GPRVM=0. This will tell the blocker to block what it can and send the remaining prism back in the GPRVM upload.
Remote Orders
If an order is submitted with the same _INV as a previous order, the data from the second transmission is appended to the end of the original raw file. There is a line indicating the start of the second transmission along with the date and time. IF the order has already been completed, an entry is made stating that the order was already completed.
...
Order purging has been added as a task that can be run using the Windows Task Scheduler. See Order Purging (RXUPURGE_ADHOC)
Scan to Print work tickets
...
In some instances, if you are printing user defined documents on a thin client session, the documents did not always print. This has been corrected.
When copying the PDF files to the thin client session for viewing or printing, if the copy fails, a message will be logged to the “Daily event time stamps”.
Added a log file for thin client XML document printing/viewing. /wiki/spaces/RXUN/pages/2545745921
RxTicket has been updated to ensure the PDF is fully written before the done file is created, fixing rare situations where the PDF was corrupted while copying over thin client sessions.
Order searching change
The ability to search for an order using the “Order PO number” has been added to some functions. The PO numbers in the order must have 9 or more numerical digits. The functions that have been enhanced to allow this are:
Lens pick
Frame pick
Job scanner simulator
Final QA check
Frame trace check
Scan to print work tickets
Print AR envelope
Tray assignment
Complete jobs
Ship jobs / packing slip
Print Zeiss digital ticket
Print IOT digital ticket
Print Signet-Armalite digital ticket