| Anchor | ||||
|---|---|---|---|---|
|
Search Optifacts User Documentation
| Live Search | ||||
|---|---|---|---|---|
|
Table of Contents (on this page)
| Table of Contents | ||||||
|---|---|---|---|---|---|---|
|
Introduction
This document will explain explains how to navigate and input data using your keyboard. Optifacts has several different types of screens. Each has standards for navigating and inputting data.
Features
- Speed - The order entry system is quick to use because it skips those windows and fields that don’t do not apply to the calculations you have entered for the job. The system also displays only those options that you ask are requested to seeview. If you know the correct code and seg for the style you want, you don’t need to display are known, showing the style list . Or if you don’t need to enter any calculation options, you don't need to display the calculation listis not required. The calculation list does not need to open if the options are not required.
- Rx Form - – Information is organized in the system is organized to reflect the order of information listed on the typical Rx form.
- Windows - All information is entered and displayed in windows , rather than in on screens. Some windows are displayed within view for every job; others are displayed only under specific circumstances. As you complete a window is complete, the next appropriate window will be displayed displays slightly below the last previous window. You can easily effortlessly move to the previous prior window by pressing the Escape (ESC) key.
- Fields - Some fields are displayed for every lens selected; others are displayed appear only if a specific lens is selected. Some windows display show all data fields , but access only applicable fields, that those applicable to the job. That is, the system will access accesses a data field if it applies to the calculations you have entered.
Definitions
- Order Entry - The Order Entry function allows you to enter all measurements, curves, and blocking needed to create the prescribed lens. If you have pricing is active, basic then invoicing information is also recorded here.
- Optifacts Blocking - Your – Design of the Optifacts software is designed to allow allows on geometric lens center blocking or MRP (Manufacturer Reference Point) blocking for lens surfacing. The system will compute computes the prism required to place optical centers, the prism direction, and the segment positioning required at Order Entry. When When on center blocking is used, a single vision must be blocked as close as possible to the lens’s geometric center of the lens. However, blocking Multifocals , however, should not be blocked on the geometric center as determined by available blank center locating methods, but rather instead, referencing up and over from the segment, equal to the layout seg down and seg, in amounts. MRP blocking is also available and is automatic for aspheric and progressive lenses. On the work ticket, the system will list The system lists the blocking method at the top and the measurements under Surfacing Markup on the work ticket.
- Right-Eye Assumption - The system always assumes you are entering the right eye calculations entered first. In any window with calculations for that include both eyes, the system will first ask asks for the right eye calculations, then and the left eye calculations. And if you’re If working with only one lens, you can signal the system to prompt for only that lens only, left or right.
- The Right , and Left lenses are labeled as R and L in the Rx window. In all other windows, two lines indicate two lenses, and the Two lines indicate the first line as right and the bottom line as left in all other windows. The right lens is always on the first line, as labeled shown in the Rx windowscreen.
Procedure
The Access the order entry screens are accessed from the Optifacts menu option 4.
Entering Values in Order Entry
- Values for various materials are input in the fields illustrated below. Inputting these values is similar to inputting dollar amounts. You must type the decimal point in the numeric entry. For example, if you want to input an entry of 3.5 for the Sphere, you would type 3, the period, and the 5. When you press Enter, the number appropriately aligns within the field. Some fields default to an entry when you Enter through it.
| Note |
|---|
*** Caution: If you do not type a decimal, all numbers typed will fall to the left of the decimal when left after pressing the Enter key is pressed. *** |
Help Keys and Shortcuts
Use the table below for instructions on navigating through the order entry screens and inputting data.
Key | How it's usedFunctions |
|---|---|
| Press "F1" to display the Help window for the field where the cursor is .
Some help texts are more lengthy than fit on one page; press the space bar to continue to the next page. (See prompt "more..." at the bottom of the screen.) Press ESC to exit the Help window and return to the field.
|
| Press "F2" to display the Calculations Options window. The status message at the bottom of the screen will tell tells you when you can access the Calculation Options window.
|
| Press "F3" to return to the first field in a window.
|
| Press "F4" to move to the last field in a window.
|
| Press "F5" to utilize the Phone Rx screen
|
| Press "Ctrl" and "Y" to toggle the CBT (Commercial Brand Tool) and the CPS (Commercial Product Selector) menu.
|
| The status message at the bottom of the screen will tell tells you the result of pressing ESC in each window. In the Tray & Acct. window, press ESC to exit Order Entry. Pressing ESC anywhere in this window will exit exits Order Entry. Use the arrow keys or F3 to back up. In the Frame Information window at the first field (Frame name or shape): press ESC to return to the Blank window. After the first field, press ESC to return to the first field. In the Near Prism window, press ESC to restart the window. In all other windows, press ESC to return to the previous window or screen; ESC backs up one window at a time. |
| Press the "Insert" key to access the Recall Options screen.
|
| Press "Enter" to advance to the next field or to complete the order when at the pricing options screen. Caution: The Enter key saves data in a field. If you move Moving between data fields using with the arrow keys , does not commit the data is not saved. If you try Trying to store information using a Tab key, by pressing Tab results in the cursor will not move moving, and you will receive an error sound. (if your system is configured for sound).only if the audio set up on the system) |
| The "Space" bar can be used to:·
|
| Use the question mark (?) key to see the available options for a field. Example: To see a list of customers in the Account field or see a list of options in any other order entry field.
|
| Press the "Page Up" key to move to the previous section. |
| Press the "Page Down" key to move to the next section. |
| Use the "END" key to navigate to the end of the Rx and reprint the work ticket |
| Press the "Left Arrow" key to move backward by one field or one page in the pricing options screens. |
| Press the "Right Arrow" key to move forward by one field or one page in the pricing options screens.
Caution: When you navigate using the arrow keys, your data will not be savedsave. You must use the Enter key to "save" data in a field. If you try to store information using a Tab key, the cursor will not move and you will receive an error sound (if your the system is configured for soundaudio). |
| Press "S" in the Patient Name field to access the Safety/Copay Account Code field.
|
| Press "V" in the Patient Name field to add the VSP account code.
|
| Press "C " at the Patient Name field to access the CBT Selection menu.
|
| Press "S" in the Style w/Seg Sz field to access the Special Entry screen.
|
| Press "L" in the Frame Name field to access the frame library.
|
| Press "I" in the Frame Name filed to access frame inventory.
|
To view and , or download these instructions as a PDF file, click on the following document image.
| View file | ||||
|---|---|---|---|---|
|