Click here to view the Job Routing menu.

Click here to view the complete Optifacts User Documentation Index.

Click here to Contact contact us.

Introduction

This document

explains the job routing tables, the Routing Group tables,

their functions

, and how they work together. Job routing

manages the transfer of jobs to an outside source or regional processing center for production and

coating based upon account and product group mapping.

Priority Number Assignments - Layering

The routing system will works best be when set up to manage a set of rules in a hierarchical approach. It is important to remember that priority numbers are sorted from highest to lowest number and used to select routing rules in a specific order. The system will find the first match (highest priority number) based on the routing and /or group definition and use that rule to route a job. If a job does not match the definition of a routing rule, it will then drop down to the next rule and try to match it. Once a match is madematched, the job will route to the specified site. The Therefore, the correct structure of the group table definitions is imperative. Priority Number, System ID, and other fields are not mandatory, but the priority number is mandatory in the Job Routing Reason and Control Manager Menu. Although not mandatory, the priority number is also useful when used in the Group Control table to assist in assigning the group to assign a specific routing rule of . You can use the same priority number in both tables makes it easy to identify but not mandatory. The Group Control Name Set is used as a trigger in the Job routing Reason and Control Manager. Fill in only the fields needed to identify the required information.

Example: You may want to group a specific set of progressives with a specific coating. You can do so by creating create a Group Style Name Set with several entries using the type code for each applicable progressive. Then, create a Group Lite-up Name Set for the coating and combine the two tables within the Group Control table.

Keys to this hierarchy are:

• Account groupings which will be - assigned to a local lab as a default.
• Process groupings which will be - assigned to processing centers that can do specific processes such as digital processing.
• Product groupings which combine combined with the two groupings above.
• Order attribute groupings: For example, Frame-to-come suggests that the order should be edged at a local lab even though surfacing may be get done at a digital lab. Uncut orders could be sent directly to a digital lab.

Example:Top-level (highest priority) – Management of customer and

product name sets. A combination of group account name set and product name set (s) = one rule.   At this level, we are mainly assigning group names to accounts, products, and processes.

Therefore, we do not trigger routing at this level

, just associating group names with the order

to use these group names in the next levels.

Example: A combination of a group account name set and product name set (s) = one rule. This name set is then used as a trigger in the Job Routing Reason and Control Manager.

• Mid-level (mid priority) – Management of uncut distribution.
• Low-level (lowest priority) – Management of edged jobs or uncut work processed at the local site.

Group Name Sets

Name sets are were designed to associate a number of several entries into one group or table. These names sets can then be used in combination Therefore, you can combine these name sets with other name sets to create a job routing rule.

Example: An Create an account group name set could be created to include accounts specific to a region or processing center.

Name sets can also be created to define groups of productproducts.

Example: A product name set can then be combined with an account group name set and /or a group lite-up table defined to allow or disallow a specific coating(s).   Any Combine any group of tables or names name sets within the group control menu can be combined to create a routing rule. 

Procedure

Custom Configuration for Save Group Names

From the Optifacts main menu:

Type Select Option 3 - Editor Utilities and press enterEnter.

Type Select Option 6 - Configuration Editor and press enterEnter.

Type Select Option 6 – Edit Custom Configuration and press enterEnter.

The Custom Configuration Editor displays.

The following custom configuration must be enabled. 

• Press Q to Query to search if the table you are looking for exists and that it is enabled.
• If the table exists but is not enabled:
• Type U to update.
• Change to Enabled field to Y
• Press escape to save the data
• If the table does not exist:
• Type A Press “A” to add a new record.
• Enter all the information as shown in the diagram below.

Image Removed

Image Added

• Press Escape to save the data.
• Type E Press “E” to exit.

Group Control Menu

The Use the tables within this menu are used to setup set up group tables and name sets which we will use to to define job routing rules.

From the Optifacts main menu:

Type Select Option 3 - Editor Utilities and press enterEnter.

Type Select Option 11 - Job Routing Menu and press enterEnter.

Type Select Option 14 -  Group Control Menu and press enter Enter to display the Group Control Menu.

Image Removed

Image Added

Group Account

Select Option 4 and press

Enter to display the Group Account table.

The Use the Group Account table is used to define an account or group of accounts when a routing rule is designed to be applicable apply to specific accounts (not all accounts).

The Group Account Table displays.

• Type A Press “A” to add a new record.
• Enter all the pertinent information pressing enter and press Enter past each field.
• Create a name set for the account or a group of accounts. An account number can be used if If the rule is applied applies to only one account., you can enter an account number or enter 0 (zero) to apply to all accounts.

Examples:

Account Name Set:  [ACCOUNT 30]                                         

Account Name Set:  [        30]                                         

Account Name Set:  [UNCUT ACCT]

The account can be defined by entering the account number in the Beginning Account Code field and Ending Account Code field. A In addition, a group of accounts can also be defined by creating multiple entries (one for each account) or a group of accounts can also be defined by by entering specifics such as Company Code, Branch Code, Territory Code, and /or Ship Code.

• Enter all the pertinent information pressing enter and press Enter past each field.

Image Removed

Image Added

•  Press Press Escape to save the data.
• Type E Press “E” to exit.

Group Frame

Select Option 5 and press

Enter to display the Group Frame table.

The Group Frame Table is used to define a specific frame or group of frames.

• Type A Press “A” to add a new record.
• Enter all the pertinent information pressing enter and press Enter past each field. Multiple entries can be created You can create multiple entries under the same Name Set.

Image Removed

Image Added

• Press Escape to save the data.
• Type E Press “E” to exit.

Group Rx

Select Option 6 and press

Enter to display the Group RX table

The Use the Group RX table is used to define RX-specific ranges and /or limitations.

• Type A Press “A” to add a new record.
• Enter all the pertinent information pressing enter and press Enter past each field. There are 3 three screens available for data entry. Multiple entries can be created In addition, you can create multiple entries under the same Name Set.

Image Removed

Image Added

• Press enter Enter through the last field to view the next screen.
• Enter any applicable data.

Image Removed

Image Added

• Press enter Enter through the last field to view the next screen.
• Enter any applicable data.

Image Removed

Image Added

• Press Escape to save the data.
• Type E Press “E” to exit.

Group Lite Up

Select Option 7 and press

Enter to display the Group Lite Up table.

The Use the Group Lite-ups Table is used to define a coating, tint, services, etc., or groups of coatings, tints, and /or services applicable to the job criteria.

• Type A Press “A” to add a new record.
• Enter all the pertinent information pressing enter and press Enter past each field. Multiple entries can be created You can create multiple entries under the same Name Set.

Image Removed

Image Added

• Press Escape to save the data.
• Type E Press “E” to exit.

You can create multiple conditions as shown in the following example:Image Removed

Image Added                                                                          

Group Style

Select Option 8 and press

Enter to display the Group Style table.

The Use the Group Style table is used to define a product by style, type, manufacturer, etc., or groups of product products under the same name set.

• Type A Press “A” to add a new record.
• Enter all the pertinent information pressing enter and press Enter past each field. Multiple entries can be created You can create multiple entries under the same Name Set.

Image Removed

Image Added

• Press Escape to save the data.
• Type E Press “E” to exit.

Group Material

Select Option 9 and press

Enter to display the Group Material table.

The Use the Group Material table is used to define a product by material code or groups of materials.

• Type A Press “A” to add a new record.
• Enter all the pertinent information pressing enter and press Enter past each field. Multiple entries can be created You can create multiple entries under the same Name Set.

Image Removed

Image Added

• Press Escape to save the data.
• Type E Press “E” to exit.

Group Color

Select Option 10 and press

Enter to display the Group Color table.

The Use the Group Color table is used to define product products by color or groups of colors.

• Type A Press “A” to add a new record.
• Enter all the pertinent information pressing enter and press Enter past each field. Multiple entries can be created You can create multiple entries under the same Name Set.

Image Removed

Image Added

• Press Escape to save the data.
• Type E Press “E” to exit.

Group Control

Select Option 2 and press

Enter to display the Group Control table.

The Group Control table is used to combine group tables into one Group Name Set, which will then be used as a trigger in the Job Routing Reason and Control Manager table to route the job with the combined criteria to a specified site. Two pages allow a combination of 6 tables and /or name sets.

• Type A Press “A” to add a new record.
• Enter all the pertinent relevant information to define a group of productproducts.

Image Removed

Image Added

Two pages allow a combination of 6 tables and /or name sets.

• Press Enter through the last field to view the next screen.

Image Removed

Image Added

•  Press Press Escape to save the data.
• Type E Press “E” to exit.

Use of NOT Name Sets

To disregard a name set within a rule, type

“NOT” in the NOT name set field.

In the following example: Table Name Set PROG GRP B will be ignored in this rule.

Image Removed

Image Added

Use of the Parenthesis Around Name Sets

We can use parenthesis around name sets to let the system know to look at either entry.

In the following example

, the rule applies if group style

“SV” and group color (TRG or TRB)

are on the job.

Image Removed

Image Added

Combined Name Sets

The Use the Group Control table can also be used to create Name Sets which you can be combined combine to create another Control Name Set.

Example: We can create new Name Sets and combine them to create a new Control Name Set used as a trigger in the Job Routing Reason and Control Manager.

• First, we create 2 two separate Control Name Sets.

Name Set PROG GRP B – Plastic Uncoated Progressive and Name Set SV GRP A – Single Vision Plastic UncoatedImage Removed     Image Removed

Image Added 

Image Added

• Then we combine them together to make a new Control Name Set.

New Control Name Set - LENS GRP A

combines PROG GRP A and SV GRP A. The table is defined as “name set” rather than the table name.

In addition, a priority number is used, which we will match

to the priority number used in the Job Routing Reason and Control Manager.

The results

state, “If the job specifications fall into name set SV GRP A or Prog Grp A, then the job will route using

“LENS GRP A

,”  which will be

a trigger in the Job Routing Reason and Control Manager.

Image Removed

Image Added

Combined Name Sets and Group Tables

You can also combine tables with name sets when creating a Control Name Set.

The results

state, “If the job specifications fall into name set Prog Grp A and grp_rx table PROGRESSIVES, then the job will route using

“LENS GRP B

,”  which will be

a trigger in the Job Routing Reason and Control Manager.

Image Removed

Image Added

Coat Codes

The Use the Coat Codes table is used to define coatings by Group Name Set and code. This code will print on the work ticket for use in production.

Type Select Option 11 – Coat Codes Table and press enter Enter to display the Coat Codes table.

Example:

We will

set up a group lite-up table with a name set of AR COAT and a group material table with a name set of PLASTIC

Image Removed

Image Added     

Image Removed

Image Added

Then we will create the Control Name Set (group menu option 2) in the Group Control table to associate the

two tables into 1 Control Name Set.

Image Removed

Image Added

Once you have created the Group Name Set has been created then , then you can add a Coating Code may be added.

Select Option 11 and press

Enter to display the Coating Codes table.

• Type A Press “A” to add a new record.
• Enter all the pertinent information pressing enter and press Enter past each field. Multiple entries can be created You can create multiple entries under the same Name Set.
• Group Name Set - same as the name set created in the group control table.
• Priority Number
• Position - Enter the character position if using the POSITION COAT CODES configuration.
• Coating Code
• Press escape Escape to save the data
• Type E Press “E” to exit.

The coating code will print on the work ticket.Image Removed

Image Added

Optifacts Rx Transfer Menu

Once you have set up all of the group tables, name sets, and controls have been setup, it is now time to add them to routing rules.

From the Optifacts Main Menu:

Type Select Option 3 and press enter Enter to display the Editor Utilities Menu.

Type Select Option 11 and press enter Enter to display the (Job Routing) Rx Transfer Menu.

Image Removed

Image Added

Type Select Option 1 to Set Send Interval & Force Transfer. Type Next, type the value and press enterEnter.

Type Select Option 2 to Re-Start Queued Transmissions.

Type Select Option 3 to Check Status of the Last Transmission.

Type Select Option 4 to review the Log File.

Type Select Option 5 to Pause/Resume the Receiving Program.

Type Select Option 6 to Set Time Periods to Send/Receive.

Type Select Option 7 to Re-send an old transmission.

Route Destination Editor

The Job Routing Destination Control Manager is used to define destination sites. The  The Route Destination Editor allows the routing lab to set up destinations to other labs that will receive the work. The following are steps to help you set up this page. 

From the Optifacts Rx Transfer Menu:

Type Select Option 11 - Route Destination Editor and press enterEnter.

The Job Routing Destination Control Manager displaysis displayed.Image Removed

Image Added

• Type A Press “A” to add a new record.
• Enter all applicable information, pressing enter and press Enter past each field.
• Destination Site
• Choose the lab to receive the routed job and enter Enter up to a 7-character lab identification name, . The receiving lab provides this name will be provided by the receiving lab.
• Out-Going file Format
• Enter file format: OPTI2.5, OPTI2.8, or other. This information can be obtained from Optifacts Customer Support can provide this information.
• Transmit Protocol
• U: UUCP, V: VisionWeb, E: External, I: Internal System, F: FTP, C: Local Copy. The protocol allows you to determine how the work is to be gets transmitted to the receiving lab. 
• Destination Directory
• Enter Optifacts home directory at the remote site. This is field identifies the current working directory of the receiving lab.
• Lab ID Number (if applicable) This is the site ID for the sending lab.
• Outgoing Site ID (if applicable) This is the site ID for the sending lab.
• Destination Agency (if applicable)
• Enter the DestAgency for the ECGXML file.
• Frame Points Required (if applicable)
• Enter 0 for 'no ‘no requirement',’ or enter 128 if 128 points are explicitly required specifically.
•  *** Commercial Code Format 
• If the destination requires different commercial codes than the default, supply the format.
•  *** Commercial Diameter Format
• Format for commercial code search searches to use in searching for commercial diameter.

 *** These formats are used instead of the lab’s specified commercial code and commercial diameter formats in if the case that the receiving lab uses different codes than the Optifacts lab. 

• Press escape Escape to save all entries.

Examples:

Example of an External site.Image Removed

Image Added

Example of setup for jobs outgoing through VisionWebImage Removed

Image Added

Examples of Internal sites.Image Removed

Image Added     

Image Removed

Image Added

Job Routing Reason and Control Manager

The Use the Job Routing Reason and Control Manager are used to define a condition for a product or product group.

Type Select Option 8  - Route Reason and Control Editor and press enterEnter.

The Job Routing Reason and Control Manager screen displaysis displayed.

This table has 3 three screens.

• Press

• “S” to view the next screen. When editing an entry, press

• Enter through all the fields to access

• the subsequent screens.

Image Removed

Image Added   

Image Removed

Image Added

Image Removed

Image Added

• Type A to add a new record.
• Enter all the pertinent information pressing enter past each field.
• Help prompts are indicated at the bottom of the screen when the cursor is moved to each field.
• Press Escape to save the data.
• Type E to exit the screen.

1st Screen: 

• Priority Program - The program drops highest to lowest to find the first set of condition conditions matching the job. It is recommended to start We recommend starting with a large number such as 10999,000 900 and increment additional priorities by 100, i.e.; 10, 999,100800, 10,200 …  doing 999,700. Doing this will allow you to sneak in additional priorities as they apply to a situation.   For example, you decide to route all Crizal jobs, so you assign it a priority of 10,000prioritize 999,100.  You also decide to route all glass jobs, so you assign it a priority of 10999,100200.  Every thing Everything is working well until you realize you don’t want to route Crizal jobs that need to must be tinted.  Because you left space, you can now assign your new routing requirement for tinted Crizal 10999,050. The  The priority number used can be the same number that was used in the Group Control table for consistency.
• Origination Site ID - Site ID of origination site (optional). Leave Empty to work from any site.
• Condition ID - Condition Name to match conditions for job attributes to set during transfer. This The Condition Name name must match the ‘Condition Name’ Condition Name given in the ‘Route Route Conditions Control Editor’ Editor page for mapping purposes. The  The condition ID is free format text and does not have to match the Group Trigger name but must match the entry in the condition ID table menu 3-11-9.
• Destination Site ID - Site ID of destination site (optional). May It may be specified in Route Conditions.  This name will be provided by the The receiving lab will provide this name.
• Group Trigger 1 - Enter a Group Name to cause routing for the Group. Precede with '!' for 'NOT'an exclamation mark (!) for NOT.
• Group Trigger 2 - Enter a Group Name to cause routing for the Group. Precede with '!' for 'NOT'an exclamation mark (!) for NOT. It is not always required to have entries in both fields 1 and 2.
• Group Name Set - Ties a Group Name to a condition, so won't won’t route. Use Group triggers to route.
• Comments - Enter your own comments for future reference. For example; , “All glass jobs will be routed to lab XYZ”XYZ.”
• Lite-Up (num) (NOT the number viewed on the screen) See - To find the num of the lite-up, see the Pricing Options Available Report in Retail Transfer (menu 11-14) to find the num of a lite-up.
• Lite-Up (bit) (NOT the number viewed on the screen) See - To find the bit of the lite-up, see the Pricing Options Available Report in Retail Transfer (menu 11-14) to find the bit of a lite-up.
• Lite-Up (num) (NOT the number viewed on the screen) See - To find the num of the lite-up, see the Pricing Options Available Report in Retail Transfer (menu 11-14) to find the num of a lite-up.
• Lite-Up (bit) (NOT the number viewed on the screen) See - To find the bit of the lite-up, see the Pricing Options Available Report in Retail Transfer (menu 11-14) to find the bit of a lite-up.
• Fld Name frm Job Def. - Field Name from Job Data Definitions Editor in Configuration Menu.
• Fld Value for Fld Name - Field Value Entered entered as a result of Job Data Name.
•  UncutUncut - Enter U/E: U if the transfer should occur when the job is entered as an uncut.
• Finished Only - Enter F/S: F to transfer if the job is Finished Lens on Both Eyes, S for Semi-Fin.
• Industrial - Enter I/D: I to transfer when the job is industrial thickness, D for Dress Thick.
• Company Code - Optional.
• Branch Code - Optional.
• Territory Code - Optional.
• Account Number - Optional.
• Ship-To Code - Optional.

2nd Screen:

• Lens Manufacturer - Enter lens manufacture code. Ii.e.; , Y for Younger, HO for Hoya, or KB for KBCO.
• Lens Style - Example 7X, P, SV, SVST. Note: Don't Don’t include seg size
• Seg Size - Inclusive lowest seg size to trigger
• Through - Inclusive Highest seg size to trigger
• Lens Type - Progressive or Aspheric Lens Type or Design. Example VC for Varilux Comfort or CL for Cosmolite.
• Color Code May - Color code may be left blank or a color code added, such as BP3 for polarized brown 3.
• Material Code May be lift - Material code may be left blank of a material code added, such as TVX for Trivex.
• Pair Only - Y to only transfer if the job is a pair as opposed to , not R for right or L for the left eye only.
• Exclude Power Increment - Exclude if power increment sphere or cylinder (0.125 is only exclusion allowed).
• Highest Minus Power - Exclude if combined minus power of sphere & cyl is more minus than this value.
• Highest Plus Power - Exclude if highest plus power without lower add is than this value.
• Highest Plus with Add - Exclude if highest plus power including lower add is than this value.
• Lower Add Range - Enter range values if applicable. Example: 0.00 through 4.00
• Upper Add Range - Enter range values if applicable. Example: 0.00 through 4.00
• True Base Range - Enter range values if applicable. Example: 1.12 through 8.49
• Blank Diameter Range If the rule you are creating is to be - Set the range from 98 to 99 if you create a manual routing rule, set the range from 98 through 99. This setting will stop this rule from being included in auto-routing. If it is to be part of auto-routing, then leave this blank.
• Minimum Blank Range - Enter range values if applicable
• Sphere Power Range - Enter range values if applicable. Example -12.00 through 10.00
• Cylinder Power Range - Enter range values if applicable. Example: -4.00 through 4.00
• Resolved Prism Range - Enter range values if applicable.

3rd Screen:

• Center Thickness Minus - Enter range values if applicable.
• Edge Thickness Minus - Enter range values if applicable.
• Center Thickness Plano - Enter range values if applicable.
• Edge Thickness Plano - Enter range values if applicable.
• Center Thickness Plus - Enter range values if applicable.:
• Edge Thickness Plus - Enter range values if applicable.
• Day of the Week - Enter 0 for Sunday, 1 Monday . . . , 2 Tuesday, 3 Wednesday, 4 Thursday, 5 Friday, 6 Saturday.
• Time of Day
  • 24 Hour time: 100 = 1:00AM, 2330 = 11:30PM.
• Beginning Date: Date Range
• Day of the Week fields are built to be a range. (0 through 6, 1 through 5, etc.) You cannot have an entry such as 6 through 0 for Saturday and Sunday only. You would need to set up two entries—one for each day. One would be range 0 through 0, and the other would be range 6 through 6. Also, the routing rule date range is based on the job calculation date, so the job would have to be calculated within the date range for the routing to be picked up.

Example:

Let’s say the date range is 6 through 6, and if the order came in on days 0 through 5, would it be routed on day 6?  

Answer: No. Any day between 0 and 5 would fail the first test. For example, day 1 is less than the beginning day (day 6), so we’d ignore the rule for that reason. Likewise, the routing comment “Will route to xxxxx” may print on the work ticket but still be ignored.

Similarly, if the range was 6 through 6 and a job came in on day 6 without a calculation error, it would be routed. Again, to be clear, the tests are based on the day of the calculation (not the day the job came in).   So, if the job came in on day 1 and was recalled on day 6, it could route on day 6 if the range begins and ends on day 6.   This is essentially the same logic that would apply if you recalled a job and turn on a lite-up that might trigger a routing rule. We’d then route the order on the recall.

In short: The system will route the job successfully based on whether the calculation date is within the range in the routing rule. If calculated outside the range specified in the rule, it gets ignored.

• Time of Day - 24 Hour time: 100 = 1:00AM, 2330 = 11:30PM. If left blank, all times are considered
• Beginning Date Range through Ending Date Range - Enter range values if applicable.

Rules without using group triggers or name sets.

The You can set up the Job Routing Reason and Control Manager can also be set up without using group tables and triggers. There are multiple screens available for data entry.

A Group Trigger is not used, but job specifics are specified as shown below.

The following fields have been entered to can define the rule:

• Condition ID
• Comment
• Lite-up num and Lite-up bit (to define the applicable coating)
• Uncut flag
• Semi-finished flag
• Lens Style code
• Lens Type code
• Color code
• Material code
• Lower add range

Image Removed

Image Added     

Image Removed

Image Added

Route Conditions Control Editor

The Route Conditions Control Editor allows the routing lab to set all the conditions as to defining when and why a job should be routed route to a different lab.

Type Select Option 9 - Route Conditions Control Editor and press enterEnter.

The Job routing condition Control Manager screen displaysis displayed.Image Removed

Image Added

• Type A Press “A” to add a new record.

Enter all the pertinent information

and press Enter past each field.

Help prompts are indicated at the bottom of the screen when the cursor

moves to each field.

• Condition ID - Enter a Condition ID that will map this set of conditions to the Routing Editor. This ID can be as simple as “Glass Job” or  “Crizal Job”Job.  ”  This name must match the ‘Condition Name’ Condition Name given in the ‘Route Route Reason and Control Editor” Editor menu 3-11-8  for mapping purposes.
• Destination Site - Destination site to which condition applies. (Routing Editor may override entry.) Choose the lab to receive the routed job and enter up to a 7-character lab identification name, . The receiving lab will provide this name will be provided by the receiving lab. The . The destination site must exist in the Route Destination table (menu 3-11-11).
• Send As Uncut - Enter Y to force the job to become Uncut en - route to the destination. Leaving this entry blank may tell the receiving lab to edge the lens as well.
• Clear Lens Diameter - Enter ‘Y’ Y to clear the blank diameter en - route to allow blank selection at the destination.
• Clear Lens Nominal Base - Enter ‘Y’ Y to clear nominal base en - route to allow blank selection at the destination.
• Bill-To-Account - Billing Account Number to be applied at the destination site. The receiving lab will enter the account number they have for either the sending lab or the doctor’s office that ordered the job.
• Bill-To Ship Code - Ship-to Code that matches the Billing Account Number at the destination site.
• Ship-To-Account - Ship-To Account Number to be applied apply at the destination site. The receiving lab will enter the ship-to number they have for the “BillBill-To-Account”Account.
• Ship-To-Ship Code - Ship-to code that matches the Ship-To Account Number at the destination site.
• Clear VSP Flag - Enter ‘Y’ Y to clear the VSP Billing designation , so it doesn't doesn’t apply at the destination.
• Clear Second Billing Flag - Enter ‘Y’ Y to clear the split bill or co-pay designation en - route.
• Clear Safety Billing Flag - Enter ‘Y’ Y to clear the safety billing en - route, so it doesn't doesn’t apply at the destination.

• Press Escape to save the data.
• Type E Press “E” to exit the screen.

Image Removed

Image Added

Route Conditions Lite-up Editor

Type Select Option 10 - Route Conditions Lite-up Editor and press enter.

The Job Routing Lite-Up Control Manager displaysis displayed.Image Removed

Image Added

• Type A Press “A” to add a new record.

Enter all the pertinent information

and press Enter past each field.

Help prompts are indicated at the bottom of the screen when the cursor

moves to each field.

• Condition ID - Condition Name to match conditions for job attributes to set during transfer. This name must match the ‘Condition Name’ given in the ‘Route Conditions Control Editor’ page for mapping purposes.
• First Number (num) - See the Pricing Options Available Report in Retail Transfer (menu 11-14).
• Second Number (bit) - See the Pricing Options Available Report in Retail Transfer (menu 11-14).
• On Off or Ignore
• ‘O’ O - will turn this option On en - route
• "F’ F - will turn Off this option en - route
• ‘I’ I - will Ignore this option all together.Use ‘S’ to altogether
• S - turn this option on for the local job
• ‘U’ U - to turn this off for the local job.

• Press Escape to save the data.
• Type E Press “E” to exit the screen.

Image Removed

Image Added

Multi-Site Destination Editor

MultiA multi-site destination editor is gets used when a job must be routed route to multiple locations for processing. We provide examples of one sequence of events below.

Menu option 15 from the Optifacts Rx Transfer menu 

• Press “A” to add a new record
• Enter all the applicable data

• and press Enter past each field.
• Multiple-Condition ID
• Order Sequence – the order in which the routing is to occur
• Condition ID

• that matches the rte_mgr and rte_cndtn tables
• Comments

• get used to describe the condition

Example:

The job needs to be sent transfer to one location for surfacing, another for tinting, and finally another for edging.

Image Removed

Image Removed

Image Removed.

Image Added

Image Added

Image Added

To view and, or download these instructions as a PDF file, click on the following document image.

Click here to return to the top of the page.