Click here to view the Tray Track menu.

Click here to view the complete Optifacts User Documentation Index.

Click here to Contact contact us.

Introduction

This document provides instructions for setting up the tray tracking stations

used to turn off or turn on a lite-up

on a job

in

progress without having to recall and edit. 

Procedure

Tracking Station setup

From the Optifacts main menu:

Type Select Option 7 - Tray Track and press enterEnter.

Type Select Option 12 - Tray Track Configuration and press enterEnter.

Type Select Option 2 - Sub-Master Station Number Setup and press enterEnter.

The Sub-Master Station Number Setup screen displaysis displayed.

Image Removed

Image Added

The following setup stops jobs at Mailout that have the specified lite-up assigned in the tracking station if they have not passed through that station.

• Press “Q” to query.

Search for the sub-master station numbers or descriptions, as determined by your system administrator.

• Enter the predetermined number in the master station number field, or enter the predetermined number or description in the applicable appropriate fields.
• Press escape Escape to show the results.

If the entries do not exist:

• Press A “A” to add a record.

• Enter the following data, as hown shown in the following diagrams, pressing enter past each field.
  • Master Station Number
  • Sub-Master Station
• Station DescriptionDescription 
  • Setup as LUON or LUOFF with the lite-up (short) description if the full description will not fit.
• Station Type - Press enter Enter to accept N as the default entry.
  Otherwise, use an option from the following list.
  • N - Normal
• Station Priority - 0 is the default priority number
• Lite-up Number
  - Enter
  • Enter the desired lite-up number that you want to trigger on or off with this sub-master station. This is the The lite-up number is seen on the pricing options page in Rx Order Entry.
• Delay station
  • Enter N“N”
• Interface Port - Leave Blank
•  After Breakage - Set to Y if applicable. This will require that the job pass through Frame Marry again after a breakage is posted. If the frame was married and a breakage was posted AFTER Frame Marry, the job will have pass through the Frame to Come process again in order for a frame bin to be reassigned. If available the same frame bin will be used as the first time it was processed through bin assignment.

• Press escape to save the data.

• Type E to exit the screen.

Image Removed

Image Removed

Station Assignment

• “N.”

• Press Escape to save the data.
• Press “E” to exit the screen.

In the following example, we are using lite-up #11 POLISH. Therefore, all jobs with the POLISH lite-up turned on have to pass through that station before being mailed out.

Image Added

Here is another example where jobs with lite-up #465 would have to pass through the IN COATLAB lite-up before Mailout is allowed.

Image Added

The lite-up #539 would need to be turned ‘OFF’ before passing through Mail Out in the following example.

Image Added

Station Assignment

Once you have set up the stations, the user may track a tray to the “LUON” or “LUOFF” stations through the station assignment screen.

From the Optifacts main menu:Type

Select Option 7 – Tray Track and press

Enter.

Select Option 7 – Station Assignment and press

Enter.

The Station Assignment Screen displays.Image Removed

Image Added

• Type Enter the station number, as assigned in the Tray Track Sub-Master and press entermaster.
• Type Enter the tray number, job number, or invoice number and press enter.

A confirmation of the change will display on the screen.Image Removed

Image Added

• Press Escape to return to the station number field.

To view and download these instructions as a PDF file, click on the following document image.

Click here to return to the top of the page.