Order Transfers:
Prompt for transfer Transfer after job entry - When checked, this will cause the manual order system to prompt the user after every order, if it should be transferred. This setting has no effect on the remote order system.
Save Duplicate Orders - This setting controls whether duplicate orders will be saved or discarded when received from a remote site. When checked, a duplicate order will be saved as Unvalid and the original order will be placed on Hold. When Un-checked, the duplicate order will be discarded, but the original order will be placed on Hold.
Supervisor Override Only Transfer by routing rules active - When checked, this will require a supervisor to override the order transmission setting on an order. When Un-checked, any operator can override the order transmission setting on an orderallow orders to be transfered based on the Routing Rules, if a routing rule is for an “Out to Lab” job station.
...
Order Transmission Level - This setting allows a lab to transfer orders to another site. The available settings are:
...
Make frame-to-follow jobs unvalid - This setting allows a lab to set the default frame option to be used in Direct Lab. There is also a default option on each account; if set, it will override this setting.
Move an unvalid error to the order release number - This setting will cause the first error in the order error list to be placed in the “Release #” filed of the order. This allows a lab to view potential errors within the Customer Service screen.
Default SHAP for orders with no tracing - When a “SHAP” tracing is placed in this field, it will be used as the detault trace on any incomming remote orders that have no tracing included in its raw file.