Click here to view the Lens Database menu.

Click here to view the complete Optifacts User Documentation Index.

Click here to Contact contact us.

Introduction

This document provides instructions for setting up Blank Switching. This process allows the entry of one named product while using another lens in production. The tables show the original lens information along with , the switched lens information, any applicable lite-ups, calc options, and /or recall options for blanks being switched.

Examples:

• Setup Set up Digital work where you want the job to be entered and priced as one type of design but use another used in production.
• Single vision lenses with a coating lite-up, and you want it to switch to use a finished stock finished lens with a factory coat.

Procedure

Blank Switch for Digital or Other Semi-finished Lens Jobs

From the Optifacts main menu:

Type Select Option 8 - Blank Selection and press enterEnter.

Type Select Option 12 - Blank Switch Editor and press enterEnter.

The Blank Switch Editor screen displays.

Lens Selection Master

The 1st step in this process you will be working in the Lens Selection Master table ( lens_sel_mst ). Notice that the brackets are on the left side of the screen, opening the fields for data entry.  In this table, you will enter the lens data

entered at the time of order entry. (What the operator keys in or is received electronically.)

Image Removed

Image Added

• Type A Press “A” to add a record. If you were updating an existing entry, then you would press U “U” to update.

In our following examples: We are switching from a 1.6 material TL, Progressive style P, type VXF “VXF” Varilux Freedom 3, color TXB “TXB” Xtractive Brown (this is what they have entered at order entry) to a 1.6 material TL, Single Vision style SV, type NA, color TXB Xtractive Brown (this is the lens that will be gets used in production).

• Enter all applicable data, pressing enter Enter past each field.
  • CBT Desc - Commercial Brand description or Family Name (or enter “NONE” if you are not using the entry for CBT)
  • System ID
  • Account
  • Type
  • Material - Original Lens Material code.
  • Style - Original Lens Style code
  • Seg Sz - Original Lens Seg Size (or “0” for no seg size) for multi focalmultifocal.
  • Lens Type - Original Lens Type code (for aspheric or progressive lenses, or “NA” for no lens type) for aspheric or progressive lenses.
  • Color - Original Lens Color code.

The following fields are filled in populate automatically with the defaults, and you should not have to change them unless one of the fields needs to be different.

Sphere - Beginning

Sphere range to Ending

Sphere range (inclusive), from lowest minus to highest plus.

Cylinder - Beginning

Cylinder range to Ending

Cylinder range (inclusive), from lowest minus to highest plus.

Cyl Axis - Beginning

Cylinder Axis to Ending

Cylinder Axis (inclusive)

.

Add Power - Beginning

Add power range to ending

Add power range (inclusive), from lowest to highest.

Prog. Fit Ht. - For Aspheric and Progressive, the Beginning fit height to the Ending fit height – maximum value (0 for others), from lower limit to upper limit.

Thickness - (I) for Industrial, (D) for Dress, or (*) for both.

Groove - (G) for Groove, (N) for Not

Groove, or (*) for both.

Drill - (D) for Drill, (N) for Not

Drill, or (*) for both.

The following fields are mandatory.:

Priority = Master tables priority number (any number).

• Record ID = Master linking ID number (any number).

  You

   You may create these entries with a * for material and * for color, adding multiple CBTs using the same priority and record ID

  , adding to multiple CBTs

  . 

  Same

   Same for the detail side, for example, the style is SV, and the material and color

  are

  get added with *. 

  This

  The reason is

  because

  that the calculator returns the product that

  is going to be

  gets used according to the product code. (Optifacts Menu 3-14-6 Refer to

  the Commercial

  the Commercial Branding Tool (CBT) Setup document for

  full

  complete details.)  This process is for digital work only.

  • Press Enter past the record ID, and you
  will be taken
  • move to the
  Light
  • Lite-Up Group field on the 2nd screen.

• Enter the lite-up group number into this field and press enter Enter (If the lite-up group is applicable applies to the master table. If not, leave it as (0)This . It could be a predetermined group number or a new one that you are creating. If it is relative to a specific lite-up, recall option, or calc calculation option, you could use that number as a reference to make it easier to remember what it is for. For example, on digital jobs, you may want to use group # 12 which is relative to recall option 12 in order entry on digital jobs, which forces the system to use SF lenses. This It could be applied apply to all digital where when you are switching switch to a single vision lens, and we do not want the system to pick a finished stock finished lens. Another example would be to use the lite-up number applicable to coating lite-up  up used at order entry that you want to use to trigger the switch from SF with a coating lite-up to a Stock Finished AR lens. For further details on this, please refer lens. Refer to the instructions later in this document on Switch SF with Coat Lite-up to Coated Stock Finished Lens for further details. 
• Enter the Min Fit Height and press enter Enter (if applicable).
• Press Escape to save the data.
• Type Press "E" to exit back to the menu.
• Press Escape to return to the Optifacts main menu.

Example: Lens Selection Master Table

Image Removed

Image Added         

Image Removed

Image Added

Lens Selection Detail 

The In the 2nd step in of this process, you will be working in the Lens Selection Detail table ( lens_sel_mst ). Notice that the brackets are on the right side of the screen, opening the fields for data entry.  In this table, you will enter the data of the lens that will be gets used in for production. (The lens we are switching to.)

From the Optifacts main menu:

Type Select Option 8 - Blank Selection and press enterEnter.

Type Select Option 12 - Blank Switch Editor and press enterEnter.

The Blank Switch Editor screen displays.

• Type Q Press “Q” to query.
• Enter search criteria for the entry you just created.

• Press Escape to perform the search
• Press "T" for the table.

Notice that the active table

is now the Lens Selection Detail ( lens_sel_dtl ), and the [ brackets ] have moved to the right side of the screen, opening up the fields for data entry. 

Image Removed

Image Added     

• Press A “A” to add a record. If you were updating an existing entry, then you would press U “U” to update.

• Enter all of the applicable data, pressing

• Enter past each field.

Priority - Priority number for multiple selection options

Material - Selected Lens Material of the lens

used in production.

Style - Selected Lens

-style of the lens

used in production.

Seg Size - Selected Lens Seg Size of the lens

used in production (or “0” for no seg).

Lens Type - Selected Lens Type of the lens

used in production. (or “NA” for no type).

Color - Selected Lens Color of the lens

used in production.

Mfr - Selected Manufacture Code of the lens

used in production (enter a forced manufacture code (- must precede mfr code) or leave the

default of “-“ if not needed).

Add Power - Add

power of the lens being switched to if needed (or leave the default of -99.0 not to

change).

Calc as Entered or Switched - Calculate as either (E) Entered or (S) Switched. Typically S.

Price as Entered or Switched - Price as either (E) Entered or (S) Switched. Typically E.

Blk Sel Failure Goes to - If Bank Select Failure leave as either (E) Entered or (S) Switched. Typically S.

Allow Coat-Switching? - (Y) to allow Coat-Switching, (N) not to

allow Coat-Switching.

Allow Inventory Deplete? - Enter (Y)

; if the stock status is D and zero QOH,

don’t select lens

. Enter (N) to ignore stock status.

Allow Inventory No QOH? - Enter (N) if zero QOH,

don’t select lens; Enter (Y) to ignore QOH.

Light-up Group Dtl Number - Enter optional

lite-up group detail records to use (or 0 for none).

• Press Escape to save the data.
• Type E to existPress “E” to exit.
• Press Escape to return to the Optifacts main menu.

Example: Lens Selection Detail Table

Image Removed

Image Added

Lens Selection Lite-up Group

From the Optifacts main menu:

Type Select Option 8 - Blank Selection and press enterEnter.

Type Select Option 12 - Blank Switch Editor and press enterEnter.

The Blank Switch Editor screen displays.

• Type Q Press “Q” to query.
• Enter search criteria for the entry you just created.

• Press Escape to perform the search.
• Press T twice.“T”
• Press A “A” to Add add a record.

The cursor will return to the Lite-up Group Dtl Number field on the 1st screen, and the fields will open for editing in the Lens Selection Lite-up Group Detail table.Image Removed

Image Added

• Type Enter the applicable group number and press enter.
• Press enter Enter past the price num and bit fields until you reach the calc or recall option field (depending on which you are needing need to work with).

• Set or Unset the option.
  • Type S Enter “S” to Set. This It will turn on the selected option.
  • Type U Press “U” to Unset. This It will turn off the selection option.
• Press escape Escape to save the data.
• Type E Press “E” to exit the screen.

Example: Lite-up Group Detail Table

Image Removed

Image Added

Semi-Finished Blank Switch Examples

The following is an example of a record that has 1 Master record with 2 Detail records:

Master Lens Entered

- Style SV, Type NA, Color T8G with coating lite-up.

1st choice Priority 10 Detail Switched to

Style SVST, Type NA, Color 8GA.

Image Removed

Image Added   

Image Removed

Image Added 

2nd choice Priority 15 Detail Switched to Style SV semi-finished Type NA, Color T8G with coating lite-up.

Image Removed

Image Added     

Image Removed

Image Added

In the following example, we are switching switch the type code from EA to TL with recall option 12.Image Removed

Image Added     

Image Removed

Image Added

In the following example, we are switching switch the color from T8B to TEB with recall option 12.Image Removed

Image Added     

Image Removed

Image Added

The following is are a couple of examples of Digital Blank Switch.:

Master Lens entered CBT Vx Comfort 2 DRX  -Material TLT, Style P, Type CDR, Color EBS.

Detail Lens switched only the color from EBS to SBF.Image Removed

Image Added     

Image Removed

Image Added

Master Lens entered CBTAutograph II+ 15MM - Material TR, Style P, Type A2X, Color SRC.

Detail Lens switched to Material P Style SV Type NA Color SRC.

Image Removed

Image Added     

Image Removed

Image Added

Anchor
#stk #stk

Blank Switch Semi-

Finished Lens with Coating Lite-up to Coated Finished Lens

Priority

Lens Selection Master Table

• Create the entries with all of the criteria of the semi-finished lens that you want to switch with a power range that relates to a finished lens with a factory AR that you have in your inventory and want to use.

ExampleImage Removed

Image Added

• Press enter Enter after you add the Record ID number is added , which takes you to the next screen. 
• In the Group Light-Up field, enter the number of the LightLite-up that number you want to use to trigger the switch. We are using the lightlite-up number in this field to make it easier to know what identify the switch is related torelationship.

ExampleImage Removed

 Image Added

• Press escape Escape to save the data.
• Type E Press “E” to exit
• Press escape Escape to return to the Optifacts main menu.

Lens Selection Master Lite-up Group

From the Optifacts main menu:

Type Select Option 8 - Blank Selection and press enterEnter.

Type Select Option 12 - Blank Switch Editor and press enterEnter.

The Blank Switch Editor screen displays.

• Type Q Press “Q” to query.
• Enter search criteria for the entry you just created.

• Press Escape to perform the search.
• Press T “T” for the table until the [ brackets ] are in the Lens Selection Master Lite-up Group ( lens_sel_mst_lgrp ) table on the left side of the screen s shown in the example below.
• Press A “A” to Add add a new record.
• Enter 25 in the Light-up Group field and press enter Enter until you reach the field for the Price Light-up: Num and Bit. 
• Here you will enter the num and bit that belongs to the coating lightlite-up 25.

• In the field Set/Unset, enter S“S.  ”  This will trigger the switch to work when this lightlite-up is on, and the order falls within the specified Style, Material, Color, and Power in the Lens Selection Master table as shown above.

ExampleImage Removed

Image Added

In addition, we do not want this switch to happen if there is a Tint tint on the order job, as we are not able to cannot apply a tint to a finished lens with AR.

To prevent this switch from happening:

• Add another entry to the Group Light-up 25
  • In the Price Light-up field, enter the num and bit of the Tinting Lighttint lite-up.
  • Enter U “U” to Unset the blank switch. 
• Press Escape to save the data.

ExampleImage Removed

Image Added

• Type Press "E" to exit.

To view and download these instructions as a PDF file, click on the following document image.

Click here to return to the top of the page.