Release date: est Released Sept 2015
(Includes changes since 6.44.00)
...
A new, easier method of setting up multiple lens designs for a digital vendor has been added. For complete details, please see 1.4 Setting Up Lens Designs using Import File (version 6.45.00).
A new report, Digital Surfacing Report, has been added, showing number of lenses per digital design, for a designated period of time, and all or specific vendor (version 6.45.00).
It is now possible to interface with a digital calculator(s) directly from Order Entry. For complete details, please see 1.5 Doing Digital Calculations From Order Entry (version 6.45.00).
New options are available to allow generating prism for digital jobs on equipment that supports that - for details, see 1.2 Prism on Digital Designs (version 6.45.00).
The DLP barcode will now be printed for Essilor jobs which send it from Essilor, when the PCL work ticket is being used with the "conveyor barcode option". For details, see Essilor (version 6.45.00).
...
1) Check to see if the Zeiss calculator returns the LDTYPE label in the LMS packet (use View/Device Info from the customer service screen for the job). If the LDTYPE label is part of the LMS packet, then go to the Digital Surface Types maintenance screen for the Zeiss calculator, under the “Device” tab, check “Save device LDTYPE”. Checking this will cause the LDTYPE received in the LMS packet from the calculator to be sent to the device. Be sure to restart the digital processor and device session, and you will need to recalculate the job(s) to use the new setting.
2) If LDTYPE is not in the LMS packet then the lab can contact Zeiss to request it be added.
...
- If the first line contains “REQ=SDF” then the surface point type is SDF.
- If the second line contains an entry similar to “11004674_R.stf” then the surface point type is STF.
- If the first 2 conditions are not present, then the surface point type is HMF.
Zeiss Digital with Schneider Equipment and Alternate Interface (version 6.44.05)
...