Click here to view the Lens Inventory menu.

Click here to view the complete Optifacts User Documentation Index.

Click here to Contact contact us.

Introduction

This document provides instructions for assigning, moving, and /or adding bin locations by SKU or product group.

Procedure

From the Optifacts main menu:

Type Select Option 9 - Inventory and press enterEnter.

Type Select Option 1 – Editor Utilities and press enterEnter.

Type Select Option 13 – Bin Location Entry and press enterEnter.

Update Bins by S:

 SKU or G: Group:

                      Image Removed

Image Added

• Type S Enter “S” to assign by SKUs, or G “G” to assign a bin location for a group of product.         

By SKU Example:

Image Removed

Type
• products.  

Change Bin Location by SKU

Image Added

• Enter the option to set the stock status
and press enter
• .
  S – Stocked. This identifies
  • • “S” Stocked - Identifies this bin as an inventory stocked
  inventory
  • • lens.
  N –
  • • “N” Non-Stocked -
  This identifies
  • • Identifies this bin as an inventory non-stocked
  inventory
  • • lens.
  D –
  • • “D” Don’t Change -
  This identifies
  • • Identifies that the bin status is not
  being changed
  • • changing.
    Type the SKU number and press enter,

  The active cursor moves to the SKU field.

  • Enter or scan the SKU number and the field will be populated .

  The field populates with the number, and the cursor

  will move

  moves to the next field—the lens information displayed in the lower section of the form. If there is currently a bin assigned to the item, it gets displayed in the Old Bin Loc field.Image Removed

  Image Added

  • Enter the new Bin Number and press enter.
  Image Removed

  Image Added

  Save the new location (Y/N)?

  • Type Y Enter “Y” to save the data.
  • Type N Enter “N” to return to the form. The changes will not be savedwon’t save.
  • Press Pressing Escape to exit exits the screen.

  By Group Example:

  Image Removed

  Change Bin Location by Group

  Image Added                

  • Type Enter the option to set the stock status and press enter.
    • S – Stocked. This identifies “S” Stocked - Identifies this bin as an inventory stocked inventorylens.
    • N – “N” Non-Stocked - This identifies Identifies this bin as an inventory non-stocked inventorylens.
    • D – “D” Don’t Change - This identifies Identifies that the bin status is not being changedchanging.

  The active cursor moves to the Old Bin Loc field, represented by an ( * ) asterisk.  

  Change Bin Location for All Items in a Specific Bin

  To change the bin location for all items in a specific bin to a new bin, perform the following:

  Info
  There could be multiple types of lenses in a specific bin location. This process changes them all, no matter the design or type.

  • Enter the old bin location and press enter.Enter the new bin location the new bin location.

  The items in the old bin location display in the lower half of the screen.

  Image Added

  Save the new location (Y/N)?

  • Enter “Y” to save the data.
  • Enter “N” to return to the form. The changes won’t save.
  • Pressing Escape exits the screen.

  Change Bin Location for a Set Group of Items in a Specific Bin

  To change a bin location by entering specific lens data, perform the following:

  • Enter the old bin location or leave as the default * and press enter.
  • Enter the manufacturer code and press enter
  • Enter the applicable data pressing enter after each field.
  • Mfr: Enter the desired manufacturer code.
  • Style: Enter the desired style code.
  • Seg Size
  • Mtl 
  • Color
  • Type
  • X-Thick
  • CT from
  • CT to
  • Base from
  • Base to
  • Diam from 
  • Diam to
  • Cyl from
  • Cyl to
  • Add-U from
  • Add-U to
  • Add-L from
  • Add-L to
  Side
  • Left
  • Right
  • Both
  All: Enter the desired seg size code.
  • Mtl: Enter the desired material code.
  • Color: Enter the desired color code.
  • Type: Enter the desired type code.
  • Diam: Enter the desired diameter code.
  • X-Thick: Enter 0 if the lens is not extra thick, or enter 1 if the lens is extra thick.
  • CT: Enter the lowest center thickness range.
  • To: Enter the highest center thickness range.
  • Base from: Enter the lowest base of the range.  Note: If the product is a finished lens, then enter the sphere power from the lowest power to the highest power.
  • To: Enter the highest base of the range.
  • From: Enter the lowest cylinder of the range.
  • To: Enter the highest cylinder of the range.
  • Add-U from: If the product range includes a product with an upper end, enter the lowest range.
  • To: If the product range includes a product with an upper end, enter the highest range.
  • Add-L from: Enter the minimum lower add.  (Single Vision has no Add power. For Single Vision, Press Enter twice to move to the Side: field.)
  • To: Enter the maximum lower add.
  • Side:
    • Enter “L” - left lens only, or
    • Enter “R” - right lens only, or
    • Enter “B” - single vision product only, or
    • Leave the asterisk (*) - all products. 
  • Enter the new bin location and press enter
  Image Removed
  • enter (alpha or numeric characters, up to 6 digits).

  Image Added

  • Save the new location (Y/N)?

    Type Y
    • Enter “Y” to save the data.
    Type N
    • Enter “N” to return to the form. The changes
    will not be saved
    • won’t save.
    Type M
    • Enter “M” to move to the New Location field and manually enter a location for each item.
    Press Escape to exit the screen.

  Info
  Continue to enter “Y” until you have viewed the entire inventory listing.

  • Pressing Escape exits the screen.

  
  

  ---

  To view and download these instructions as a PDF file, click on the following document image.

  View file
  name Bin Location Entry.pdf height 250

Click here to return to the top of the page.