Click here to view the Lens Database menu.

Click here to view the complete Optifacts User Documentation Index.

Click here to Contact contact us.

Introduction

This document provides instructions for setting up Coat Switching. This process allows the entry of one lens coating to another.

• Driven by pricing lite-ups.
• Operator The operator can enter color as it appears to the eye.
• Color sub still available, either . Either or both can be used (substitution can be prevented by individual liteLite-up can prevent substitution).
• Up to 40 levels (color sub has 1 level only).
• Program The program first checks for lite-ups NOT to NOT switch, then looks for Exact Matches, then for Okay To Switch.Manufacturer can optionally be forced.
• Option to force Manufacturers
• Switched color is used for lookup in blank selection.

The operator will always enter the color of the lens as it appears to the eye.  ThusSo, for example, a job where one might use using an uncoated lens, a scratch-coated lens, or an AR lens out of the box will be gets entered as "W"“W.  ”  All modifiers to the lens would be are done via lite-ups on the pricing page of within order entry.  If So, for example, if the ECP specified Crizal, the operator would accept the default color ("W" or "SRC"“W” or “SRC”) and then light up Crizal. 

After entering the job is entered, blank selection will first look at the "Don't “Don’t Switch by lite-up" up” data.  This It allows conflicting combinations of lite-ups not to not do coat switching.  For example, the first record shows for stock lenses, if lite-up 2,2 is on (Solid Tint), and lite-up 2,18 is on (Crizal), blank selection will NOT coat switch.  One can also override and prevent the original Optifacts nominal color substitution by lite-up.  Additionally, this section of the screen This screen section will also allow an entry to prevent STK/SF splitting in blank selection.

If there are no conditions that will prevent switching, the center section data is gets checked to see if there is an exact match for the entered color.  This It can optionally force the use of a specific manufacturer to be used.  There can be more than one record within the entered color and lite-up , for stock or SFsemi-finished.  If more than one is found, they are get sorted by the priority number.

If no exact matches are found, the program then looks at the third section of the screen , to see if there is an okay switch for a lite-up.

Once a good record gets found in supplier_priority is found , the program will blank select for selects this changed color code , and specific specified manufacturer if entered.   Thus, only one record gets considered in supplier_priority each for stock and SF will be consideredsemi-finished.Image Removed

Image Added

Image Removed

Image Added 

Image Removed

Image Added

Procedure

From the Optifacts main menu:

Type Select Option 8 - Blank Selection and press enterEnter.

Type Select Option 10 - Coat Switch Editor and press enterEnter.

The Coat Switch Editor displays. The active table is the No Switch table.Image Removed

Image Added

Don't Switch by Lite-up

• Press Q “Q” and Escape to query existing entries that are in the No Switch table.
• Type A Press “A”  to add a new record or U “U” to update an existing record.

In the No Switch table, the The Don’t Switch by lite-up fields define a lite-up that will not switch in the No Switch table.

Example: Activating coat switching on a product that has a tint would not be desirable. An uncoated product would be is preferred.Image Removed

Image Added

STK Flg

- This field is left blank when activating F/SF blank splitting (-3/-3).

However, if both finished and semi-finished

need switching, two separate entries MUST be made.

• 1 – Will change stock finished lens.
• 2 – Will change semi-finished lens

Num and Bit

- Both of these fields work in conjunction with each other. The Num/Bit values represent the lite-up that is

defined.

NoNum and NoBit

- Enter the pricing number from 0-16 or -1/-2/-3

• -1/-1 – To never switch the above lite-up; otherwise, enter a num/bit that will conflict with the above lite-up and should not be switchedswitch.
• -2/-2 – Prevents nominal color substitutions.
• -3/-3 - Prevents Finished/Semi-finished blank selection splitting.

Press Escape to save the data.

Exact Coat Match for a Lite-up

The second table is the Coat Match table.

• To activate the Coat Match table, press T “T,” and the [ ] brackets will move down to the second portion of the screen, enabling data entry.
• Press Q and Escape to query existing entries that are in the Coat Match table.
• Type A to add a new record or U to update an existing record.

In the Coat Match table, the The Exact Coat Match for a lite-up field defines what products you can be substituted substitute for another in the Coat Match table.

Example: If a hard-coated finished lens can not can’t be found, but an uncoated finished lens can be found, this you can be set it to tell the system to pick the uncoated lens and process the job using a hard coat lite-up.

STK Flg

- To switch both finished and semi-finished

, you MUST make two separate entries

.

• 1 – Will change stock finished lens.
• 2 – Will change semi-finished lens

Num and Bit

- Both of these fields work in conjunction with each other. The Num/Bit values represent the lite-up that is

defined.

Entered Clr

- Standard color code entry in the color field to be defined

with the Num/Bit field.

Priority Number

- Define the priority of the defined scenario. Valid priorities are from 1 through 20, with the lower number representing the higher priority.

OK Mfr

- Defines a specific manufacturer to

switch. If the switch is to work with specific but not all manufacturers, you MUST make separate entries

. Otherwise, leave this field blank to represent all manufacturers.

OK Clr

- Defines what coat is ok to switch

.

Example: The following setup says that when a stock lens (1) and a lite-up of (2/16) A/R is used AR is selected, and a color code of SRC is entered, the lens pick will switch to a finished lens with a color of AR if it is available.Image Removed

Image Added

Okay Coat Switch for a lite-up

In the Coat Switch table, the Okay Coat Switch for a lite-up fields are basically is the same as the Exact Coat Match for a lite-up fields. The only difference is that it’s a secondary table to catch product products that could not can’t be entered into the No Switch table.

Stk Flg

– To switch both finished and semi-finished

, you MUST make two separate entries

. 

• 1 – Will change stock finished lens.
• 2 – Will change semi-finished lens

Num/Bit

- Both of these fields work in conjunction with each other. The Num/Bit values represent the lite-up that is

defined.

Entered Clr

- Standard color code entry in the color field to be defined

with the Num/Bit field.

Priority Number

- Define the priority of the defined scenario. Valid priorities are from 1 through 20, with the lower number representing the higher priority.

OK Mfr

- Defines a specific manufacturer to

switch. If the switch is to work with specific but not all manufacturers, you MUST make separate entries

. Otherwise, leave this field blank to represent all manufacturers.

OK Clr

- Defines what coat is ok to switch

.

Example: The following setup says that when a stock lens (1) and a lite-up of (2/16) A/R is gets used, and a color code of SRC is entered, the lens pick will switch to a finished lens with a color of AR if it is available.Image Removed

Image Added

• Press "E" to exit.

To view and download these instructions as a PDF file, click on the following document image.

Click here to return to the top of the page.