To be released soon....Released 27 November 2017
Digital and Device Interfaces
For Zeiss digital, multiple LDPATH files are returned and the correct one chosen based on a combination of type, vendor and model. When devices were connected in a daisy-chain fashion (multiple devices on the same COM port, or using the same TCP/IP address), the vendor and model of the last valid communication was used to try to identify which LDPATH file to send. In some cases, the file was not being sent to the generatorthis could result in no file being found. This has been corrected (version 7.02.01).
...
When a frame type is present with thickness rules, and thickness rules are also thickness exceptions set for a specific tint/treat treatment combination (ie polarized), the frame thickness will take precedence; it thicknesses were taking precedence. It should be the thickest of the possible options that gets used (affects ; this change affects the values sent in the MINEDG and MINCTR labels).
Added support for PLRCRV and PLRLOC labels (version 7.03.00).
Essilor Latam wants When a lab uses multiple engraving devices (for example, a laser engraver and mechanical engraving on the generator), Essilor digital jobs need to be able to send different ENGMARK records for different devices ; (for example, one set of ENGMARK records for an the Orbit and a different set for a laser engraver). In addition, there could be some ENGMARK records in common for both. Made changes Changes have been made to save ENGMARK records from the main section of the LMS file (outside any LDCRYPT blocks) and also to save ENGMARK records that are sent within LDCRYPT blocks for specific devices. For the DEO:VFT block, the records are saved for all device GEN types; for DEO:LASEROPLM3, the records are saved for ENG session type; any other DEO: value, the records are saved for the session type that follows DEO:. ENGMARK records outside of LDCRYPT blocks are saved with no specific device type (so will be sent to any device requesting ENGMARK) (version 7.03.00).
A new label, CLNVB, has been added for Varilux X products; this can be activated by specific lens style, on the Optional tab, which makes it accessible on the Optional Surfacing/F12 screen in order entry (version 7.03.00).
The ELLH, for uncuts without frame, were defaulting to 2mm larger than the block size instead of defaulting to the crib size. This has been corrected (version 7.03.00).
...
The VCA Label Table Settings database has been modified to enable lookup by LNAM value the value in addition to the key fields. This is especially useful for finding LNAM values for Essilor (version 7.03.00).
...
If the WRAP flag is turned off on order, then do not we no longer print the ZTILT, PANTO, or vertex info on the compensated line of the PCL an and PCI work tickets (version 7.03.00).
...
A new option has been added – “Initial Initial Load of Discontinued Lenses” Inventory Items (version 7.03.00).
Job Tracking
...