...
A problem where a file error 23 could occur while importing a remote order, under certain conditions, has been fixed (version 6.37.01).
A new option has been added to Order Entry to permit the user to select a frame shape from a screen of frame shapes, and resize it (if desired): Complete details on this can be found at Pre-defined Shapes.
Digital Surfacing
Support for Hoya Digital has been added. Complete details can be found at Hoya Digital Surfacing (version 6.38.00).
Options for feasibility check have been added to digital types. For complete details, see 1.3 Feasibility Checks. Feasibility checks can currently be done only for IOT, CrossBows, and Signet Armorlite (version 6.38.00).
...
A version field has been added to device setup. By default, the pre-308 version of the DRILLE label is sent to a device. If a device supports the parts of the DRILLE added in 3.08 (minimum thickness, maximum thickness, and group), setting the field to 3.08 (or higher) will cause these fields to be sent. If the device supports the resize option (added in 3.10), setting the version field to 3.10 (or higher) will cause the resize to be sent, in addition to the minimum and maximum thicknesses, and the group identifier. Of course the values can be sent only if they have been stored on the frame trace (version 6.38).
Labels MESG, and MESG1 through MESG12 have been added. MESG exports all comment lines as multiple MESG records (1 comment line per MESG record); MESG1 exports the first comment line, MESG2 the second comment line, up to MESG11 for the 11th comment line. This permits a VCA export file, for example, to include comment lines for an order (version 6.38.00).
Trace Exports
The ability to export traces to a VCA-format file has been added to the “Frame Tracings”. From within a trace, if the “Export” button is clicked, a new screen allows the user to select the location and filename to export to:
...