Anchor | ||||
---|---|---|---|---|
|
Search Optifacts User Documentation
Live Search | ||||
---|---|---|---|---|
|
Table of Contents (on this page)
Table of Contents | ||||
---|---|---|---|---|
|
Introduction
This document provides instructions for setting up the enabling the Job Summary screen in Rx Order Entry custom configurations that will set default codes in the material and color code fields.
Procedure
Step 1 - Enable the Custom Configuration
From the Optifacts main menu:
Select Option 3 – Editor Utilities and press enter.
Select Option 6 – Configuration Editor and press enter.
Select Option 6 – Custom Configuration Editor and press enter.
The Custom Configuration Editor displays.
- Press "Q" to Query.
- Ensure that the tables below exist.
If the tables do not exist.
- Press "A" to add a new record.
- Enter all the information as per the example (s) below.
- Press Escape to save the data.
- Type E to exit.
Default Material Code
The following entry allows you to set the default material in Order Entry to any valid material code.
Default Color Code
The next entry will allow you to set the default color code “W” in Order Entry to any other valid color code.
Aspheric/Progressive Default Color Code
The following configuration enables the Aspheric and Progressive default color in Order Entry to any valid color code.
Step 2 – Update the Lab General Configuration
From the Optifacts main menu:
- Select Option 3 – Editor Utilities and press enter.
- Select Option 6 – Configuration Editor and press enter.
- Select Option 4 - Edit Lab General Configuration and press enter.
The Lab General Configuration Editor displays.
- Enable the “PROMPT INSERT INV’ – Type ‘Y’ and press Enter.
- Press F2 to save the data, and you will return to the Configuration Menu.
Default Order Entry View
- Enter a job as usual.
- The Job Summary will display.
To view and, or download these instructions as a PDF file, click on the following document image.
View file | ||||
---|---|---|---|---|
|