Click here to view the Work Ticket Setup & Messages menu.

Click here to view the complete Optifacts User Documentation Index.

Click here to Contact us.

Introduction

This document provides instructions for enabling and printing a customized barcode image on the LayCom work ticket form with that capability. The symbology, height, location, rotation, and label of the barcode is customizable for each individual setup.

Procedure

Determine what data you wish to print in the barcode. The data for this barcode is taken from data that is stored within the job_data table. Printing of the barcode can be triggered by any method available in the job triggers or other menus to set a job data item. This document will example a barcode of a remote tray number.

Begin by creating the placeholder for the barcode.

Job Data Definitions

From the Optifacts main menu:

Type 3 - Editor Utilities and press enter.

Type 6 - Configuration Editor and press enter.

Type 7 – Edit Job Data Definitions and press enter.

The Prompt Configuration for Miscellaneous Job Related data screen displays.

• Press Q to Query to perform a search for the table shown below.
• You can then use N and P to scroll forwards and backwards in the results list, and press U to update an existing record. (If you need more assistance with navigating this screen, please refer to the appropriate SOP for navigating Perform Screens.)

If the table does not exist:

• Type A to add a new record for work ticket bar code.
• Enter all the information as shown in the diagram below.
• Press Escape to save the data.
  • Repeat this procedure for each barcode configuration you will be making.
• Type E to exit.

Field Name

• Must begin as WT BAR CODE, followed by a space, and then a number 1 through 20. WT BAR CODE 1, WT BAR CODE 2, etc.
  • This entry matches the Field Name from the Custom Configuration screen.
  • Each entry must be uniquely named, from WT BAR CODE 1 through WT BAR CODE 20.

Prompt Order

• A numerical value. Since this configuration is not prompting an operator for input, this value is not used, but still required. 30 is being used in this example.

Order Within Prompt Grp

• May be left blank

Prompt Title

• May be left blank, but advise placing something in this field.

 Validation Mask

• May be left blank.

Include or Limit

• May be left blank.

Minimum Characters

• Numerical value. May be left as 0.

Comment

• Comment this entry as you see fit.

Print in Invoice Box

• Leave this as N to prevent the barcode text from printing in one of the invoice boxes.

Invoice Prefix

• Leave blank. If printing to an invoice box, text here would prefix the data printed.

XML Tag

• Leave blank.

Mandatory

• Set to F to signify this as a flag that will not require operator input.

Prompt Station

• Set to NONE, since no operator input is required.

Local Use Only

• Set to Y, as this data will not be included on routed jobs.

Right, Left, or Job

• Set to J, as barcode applies to the job.

Tibco Use

• Leave blank.

Relaunch Use:

• Leave blank or set to Y if you know you would desire this barcode to be pre-configured for any relaunched jobs. It is better to leave the unset and allow the system to automatically enable a barcode on a relaunched job.
  Press the Escape key to complete adding your entry. Repeat this procedure from “Press A to begin adding” for each barcode configuration you will be making.

Remote Tray Number

Next, we are creating a new job_data for REMOTE TRAY NUMBER. This is a job_data field where the system will store the remote tray number on jobs where it applies.

• Press A or U to add or Update (if needed) an entry for ‘REMOTE TRAY NUMBER’. Refer to the instructions shown above.

• Press the Escape key to complete adding your entry.
  Press the E key to exit this screen and return to the Configuration Menu.

Note that this particular Job Data, REMOTE TRAY NUMBER, relies on mapping controls in retail transfer to correctly map the remote tray number into the correct Job Data field. Please see the appropriate SOP for Retail Transfer for more information.

Job Data Triggers

Next, define the trigger for each barcode, in this example we are using the actual account number as the trigger.

From the Optifacts main menu:

Type 3 – Editor Utilities and press enter.

Type 6 – Configuration Editor and press enter.

Type 7 – Edit Job Data Triggers and press enter.

The Triggers to Cause Prompts for Miscellaneous Job Related Data window displays.

• Press Q to Query to search if the table you are looking for exists.
• Press Escape to search. You can then use N and P to scroll forwards and backwards in the results list, and press U to update an existing record. (If you need more assistance with navigating this screen, please refer to the appropriate SOP for navigating Perform Screens.)
  This screen defines what data will trigger the appearance of the barcode, and points to

If the table does not exist:

• Type A to add a new record.
• Enter all the information as shown in the diagram below.
• Press Escape to save the data.
• Type E to exit.

This screen defines what data will trigger the appearance of the barcode, and points to the job data element that contains the barcode text.

Account Number

• This example uses account 1.

Ship To Code

• Leave blank

Lite-Up (num)

• Leave blank

Lite-Up (bit)

• Leave blank

Lite-Up On/Off

• Set to N since this entry is not using light up configuration.

 Account Segment

• Leave blank

Account Sub-Segment

• Leave blank

Sales Group

• Leave blank

Buying Group

• Leave blank

Chain Group

• Leave blank

Business Type

• Leave blank

Field Name

• Set to WT BAR CODE 1 (or what name you are using for the WT BAR CODE. i.e. WT BAR CODE 2, etc)

Default Value

• Set to REMOTE TRAY NUMBER ( for this example. You can also enter the name of any other valid job data field here)

Custom Configuration

The last step is to define information about where and how the information will print on the ticket. Some of this may require trial and error to obtain the optimal placement and size of the text to meet your desired outcome.

From the Optifacts main menu:

Type 3 - Editor Utilities and press enter.

Type 6 - Configuration Editor and press enter.

Type 6 – Edit Custom Configuration and press enter.

The Custom Configuration Editor displays.

• Press Q to Query to search if the table you are looking for exists.
• Press Escape to search. You can then use N and P to scroll forwards and backwards in the results list, and press U to update an existing record. (If you need more assistance with navigating this screen, please refer to the appropriate SOP for navigating Perform Screens.)

If the table does not exist:

• Type A to add a new record.
• Enter all the information as shown in the diagram below.
  • Character Setting, Float and Integer values may vary by lab. This is only an example.
• Press Escape to save the data.
• Repeat this procedure for each barcode configuration you will be making.
• Type E to exit.

Calling Program

• Must be LAYOUT, no other options exists.

Field Name

• Must begin as WT BAR CODE, followed by a space, and then a number 1 through 20. WT BAR CODE 1, WT BAR CODE 2, etc.
• Each entry must be uniquely named, from WT BAR CODE 1 through WT BAR CODE 20.

Enabled

• Set to Y to enable, N to disable this barcode.

Character Setting

This field is filled with five parameters separated by a comma delimiter. ( separated with a semi-colon delimiter in non-US locations where a comma is used for decimal notation)

• Type parameter – This is the barcode symbology used for the barcode. This choice is important as the capabilities and what each type of barcode is able to print will differ. A brief description of each barcode capability is shown below. Choices are (Upper/Lower case is not important):

 Code39 

• This is a linear barcode that will get longer the more characters you try to encode. The data field can hold any of the following:
  • Numbers 0-9
  • Capital letters A-Z
  • Symbols -.$/+%* and space 

Code128

Image Added

• Code 128 is an arbitrarily long, high-density barcode symbology that can be used to encode full 256 character extended-ASCII.

Image Removed     

Interleaved2of5

Image Added

• Interleaved 2 of 5 is a high-density numeric barcode symbology. The data can consist of any number of digits (numbers). If the length of the digits is odd, then the barcode will prefix the digits with 0. (encoding 123 will result in a barcode that reads 0123)

Image RemovedCode2of5

     Image Added

Code2of5

• Code 2 of 5 is a simple low density numeric barcode symbology. The data can consist of any number of digits (numbers).

Image RemovedDatamatrixDatamatrix

Image Added

• The Data Matrix symbology is 2D matrix-style barcode that can encode full 256 character extended-ASCII. You can encode extremely amounts of data within a small barcode.

Image RemovedQrcodeQrcode

Image Added

• The QR Code symbology is a 2D matrix-style barcode symbology that can encode full 256 character extended-ASCII. You can encode extremely amounts of data within a small barcode.

Image Removed

Height parameter

• A numerical value, representing approximate height of the barcode in inches. Keep in mind there is a small border around the barcode in order to maintain readability, so specifying a height of 0.5 inch will yield a barcode slightly shorter than 0.5 inch.

• Rotation parameter
  • A numerical value, representing axis to print along. 0 = normal left to right, 180 upside down, etc. Orientation of 0 is when holding paper in portrait mode. (taller than it is wider) See Appendix A for more information.
• Print value
  • This is either Y or N. For the non-2D bar codes, it is possible to print the textual representation of the barcode just underneath the barcode. Examples shown in Code128 and Code39 above.

Float Setting

• This is a numerical value. The ‘X’ coordinate, or measurement from the left margin to where you wish to print. Value is entered in mm format. See Appendix A for more information.
  • Left most printable margin is 5.0
  • Right most printable margin is 210.0

Integer Setting

• This is a numerical value. The ‘Y’ coordinate, or measurement from the bottom margin to where you wish to print. Value is entered in mm format. See Appendix A for more information.
  • Bottom most printable margin is 5.0
  • Top most printable margin is 275.0

Comment:

• Enter comments about this entry. An Optifacts default is to input comments about the field requirements, as shown in the example above.

• Enter an appropriate test job to validate the new text/barcode appears on the work ticket.

Click here to return to the top of the page.