| Anchor | ||||
|---|---|---|---|---|
|
Search Optifacts User Documentation
| Live Search | ||||
|---|---|---|---|---|
|
Table of Contents (on this page)
| Table of Contents | ||||
|---|---|---|---|---|
|
Introduction
This document provides instructions for adjusting the DBL (Bridge), Eye size (A 7 B), or C-size (Circumference) on a frameto recover a remote tracing by job number and attach it to a new job.
Procedure
From the Optifacts main menu:
Type 11 - Retail Transfer and press enter.
Type 9 - Utility: Remote Tracing Admin and press enter.
Type 2 - Recover a Remote Tracing by Job Number
The Remote Trace Menu displays.
- Type or scan the job number of the frame to mirror and press enter.
- Type or scan the tray number of the frame to size and press enter
If successful, you will see a confirmation message as follows:shown in the following diagram.
If unsuccessful, you will see a confirmation message as follows:shown in the following diagram.
- Press escape to return to the Remote Trace menu.