Click here to view the Lab Configuration menu.

Click here to view the Job Data Definitions and Triggers menu.

Click here to view the complete Optifacts User Documentation Index.

Click here to Contact us.

Introduction

This document provides instructions for adding Job Data configurations for the Specify Crib R and Specify Crib L lite-ups for manual crib specification.

Procedure

Job Data Definitions

From the Optifacts main menu:

Type 3 – Editor Utilities and press enter.

Type 6 – Configuration Editor and press enter.

Type 7 – Edit Job Data Definitions and press enter.

The Prompt Configuration for Miscellaneous Job Related Data screen displays.

• Press Q to Query.
• Ensure that the tables below exist.

Procedure

• If the tables do not exist:
  • Type A to add a new record.
  • Enter all the information as per the example (s) below.
  • Press Escape to save the data.
  • Type E to exit.

Image Added

Image Added

Job Data Triggers

From the Optifacts Main Menu:

Type 3 – Editor Utilities and press enter..

Type 6 – Configuration Editor and press enter.

Type 8 – Edit Job Data Triggers and press enter.

The Triggers to Cause Prompts for Miscellaneous Job Related Data screen displays.

• Press Q to Query.
• Ensure that the tables below exist. If the tables do not exist:
  • Type A to add a new record.
  • Enter all the information as per the example (s) below.
  • Press Escape to save the data.
  • Type E to exit.

Note: The Lite-up (num) and Lite-up (bit) numbers may vary by lab. Please refer to the Retail Pricing Options Report to locate the correct numbers.

Image Added

Image Added

Click here to return to the top of the page.