| Anchor | ||||
|---|---|---|---|---|
|
Search Optifacts User Documentation
| Live Search | ||||
|---|---|---|---|---|
|
Table of Contents (on this page)
| Table of Contents | ||||
|---|---|---|---|---|
|
Introduction
This document provides instructions for assigning, moving, and/or adding bin locations by SKU or product group.
Procedure
From the Optifacts main menu:
Type 9 - Inventory and press enter.
Type 1 – Editor Utilities and press enter.
Type 13 – Bin Location Entry and press enter.
- Enter the Warehouse ID (You will only see this screen if your lab uses multiple warehouses.)
Update Bins by S: Skus or G: Group:
Type S to assign by SKUs or G to assign a bin location for a group of product.
By SKU Example:
- Type the option to set the stock status and press enter.
S – Stocked. This identifies this bin as stocked inventory.
N – Non-Stocked - This identifies this bin as non-stocked inventory.
D – Don’t Change - This identifies that the bin status is not being changed.
The active cursor will move to the SKU# field.
- Type the SKU number and press enter, or scan the SKU number, the field will be populated with the number and the cursor will move to the next field.The lens information will also be shown in the lower section of the form.
If there is currently a bin assigned to the item, it will be shown in the Old Bin Loc field.
- Enter the new Bin Number and press enter
- Save the new location (Y/N)?
- Type Y to save the data.
- Type N to return to the form. The changes will not be saved.
- Press Escape to exit the screen.
By Group Example:
Type the option to set the stock status and press enter.
- S – Stocked. This identifies this bin as stocked inventory.
- N – Non-Stocked - This identifies this bin as non-stocked inventory.
- D – Don’t Change - This identifies that the bin status is not being changed.
The active cursor will move to the Old Bin Loc field and is represented by an ( * ) asterisk.
Change Bin Location for all Items in a Specific Bin
To change the bin location for all items in a specific bin to a new bin, perform the following:
Note: There could be multiple types of lenses in a specific bin location. This process will change them all no matter the design or type.
- Enter the old bin location and press enter.
- Enter the new bin location and press enter.
The items in the old bin location will be shown in lower half of the screen.
- Save the new location (Y/N)?
- Type Y to save the data.
- Type N to return to the form. The changes will not be saved.
- Type M to move to the New Location field and manually enter a location for each item.
Change Bin Location for a specific group of Items in a Specific Bin
To change a bin location by entering specific lens data, perform the following:
- Enter the old bin location or leave as the default * and press enter.
- Enter the manufacturer code and press enter
- Enter the applicable data pressing enter after each field.
- Mfr: Enter the desired manufacturer code.
- Style: Enter the desired style code.
- Seg Size: Enter the desired seg size code.
- Mtl: Enter the desired material code.
- Color: Enter the desired color code.
- Type: Enter the desired type code.
- Diam: Enter the desired diameter code.
- X-Thick: Enter 0 if the lens is not extra thick, or enter 1 if the lens is extra thick.
- CT: Enter the lowest center thickness range.
- to: Enter the highest center thickness range.
- Base from: Enter the lowest base of the range. Note:If the product is a finished lens, then enter the sphere power from lowest power to highest power.
- To: Enter the highest base of the range.
- Cyl. From: Enter the lowest cylinder of the range.
- To: Enter the highest cylinder of the range.
- Add-U from: If the product range includes a product with an upper end, enter the lowest range.
- To: If the product range includes a product with an upper end, enter the highest range.
- Add-L from: Enter the minimum lower add. Note: Single Vision has no add power. For Single Vision, Press Enter twice to move to the Side: field.
- To: Enter the maximum lower add.
- Side:
- Enter L - left lens only, or
- Enter R - right lens only, or
- Enter B - single vision product only, or
- Leave as * - all products.
- Enter the new bin location and press enter (alpha or numeric characters, up to 6 digits).
- Save the new location (Y/N)?
- Type Y to save the data.
- Type N to return to the form. The changes will not be saved.
- Type M to move to the New Location field and manually enter a location for each item.
Note: Continue to type Y until the entire inventory listing has been viewed.Note: Continue to type Y until the entire inventory listing has been viewed.
- Press Escape to exit the screen.