...
As it stands the “MrOrange” Trace/blocker combo is the central point of communication to Rx-Universe. In other words, the “MrOrange” Edger is not capable of communication directly to RxUniverse, therefore jobs that have been traced or blocked on any other equipment other then the connected “MrOrange” Trace/blocker combo can not be edged on the “MrOrange” Edger. This also means that any Jobs traced and blocked by the “MrOrange” Tracer/Blocker combo cannot be edged on any other edger then than the very same one that it is connected to.
...
3- To verify the communication between the Tracer/Blocker and Edger you will see a green checkmark on the top right Corner corner Icon.
4- Next you need to connect the provide provided “MrOrange” bar code scanner to the Tracer/Blocker, there should be a second bar code scanner attached to the Edger.
5- Next step you will need to scan the proper barcodes to enable OMA Communication on the Tracer/Blocker. Note that you don’t need to scan the bar code on the Edger since it will not communicate directly to RxUniverseRx-Universe.
- Scan the Configuration by Default and the machine will reboot
- Scan the Configuration VCA and the machine will reboot
- Scan JOBPUB. The machine will not reboot on this barcode but a “beep” will indicate that the setting has been changed
6- You need to add the MrOrange to the RxUniverse Rx-Universe devices. Follow this link → how to add a device in RxUniverseRx-Universe